Announcement

Collapse
No announcement yet.

Delta Pulse

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by kt315 View Post
    can you write what the board sizes would be optimal in your opinion? what box you are planning to use? what mounting dimensions would be good in your opinion?

    I don't know sincerly , if you mean that the work is in progress ok we wait some days

    Comment


    • i have an accident with my delta pluse 10000uf Pops
      and i have another one but i want to know what is the problem first i used power supply not battery and connect 10 k ohm between gate and source of mosfet what the problem to Pops
      i am sorry for more question
      i have 0.4 and 0.8 and 0.3 thickness of wire and i want how to make coil with good inductance and resistance what no of turn and diameter
      ????????????????????

      Comment


      • Originally posted by amel View Post
        i have an accident with my delta pluse 10000uf Pops
        and i have another one but i want to know what is the problem first i used power supply not battery and connect 10 k ohm between gate and source of mosfet what the problem to Pops
        i am sorry for more question
        i have 0.4 and 0.8 and 0.3 thickness of wire and i want how to make coil with good inductance and resistance what no of turn and diameter
        ????????????????????
        Over voltage maybe? Or wrong polarity?

        Comment


        • Originally posted by ivconic View Post
          Over voltage maybe? Or wrong polarity?
          yes ivconic wrong polarity
          regards

          Comment


          • LF357

            Hello friends. Had at Linear Technology substitute for LF357

            Comment


            • will test soon with (TLE 2082 AC ) i believe to laboratory correctly..

              Comment


              • Originally posted by kt315 View Post
                can you write what the board sizes would be optimal in your opinion? what box you are planning to use? what mounting dimensions would be good in your opinion?

                please post the new PCB

                Comment


                • ??????????????????????

                  why I find no answers to my questions? Information must be accessible to everyone

                  Comment


                  • Originally posted by apocalypto View Post
                    why I find no answers to my questions? Information must be accessible to everyone
                    apocalypto,

                    I have to do WITHOUT MISTAKES. it takes much time.
                    sorry for a delay. I have to solder King Cobra PCB back. People ask about coil tuning but without working board that is impossible. I am bursted between DP and Cobra in one hand is the PCB soldering, in another DP board in P-CAD.

                    good luck!
                    Attached Files

                    Comment


                    • Originally posted by ivconic View Post
                      Over voltage maybe? Or wrong polarity?
                      thanks
                      yes may be that occur with me
                      but the resistanc of my coil is 2.5 ohm it is acceptable?
                      sorry i cant understand your video what is this language ?

                      Comment


                      • Hi amel
                        What are the size , specifications of your coil?--
                        j.

                        Comment


                        • Originally posted by jap View Post
                          Hi amel
                          What are the size , specifications of your coil?--
                          j.
                          0.5mm & 31 turn &19 cm result 450 u h and 2.5 ohm

                          Comment


                          • Hi amel
                            for Calculations the program Coil_Calculator your coil give 1.174mh.
                            try -19cm,0.5mm,37tu ,1.645mh.
                            -********40cm,0.5mm,24tu=cat 5 (3x8tu) , 1.737mh very good********
                            best time
                            j.

                            Comment


                            • Originally posted by kt315 View Post
                              apocalypto,

                              I have to do WITHOUT MISTAKES. it takes much time.
                              sorry for a delay. I have to solder King Cobra PCB back. People ask about coil tuning but without working board that is impossible. I am bursted between DP and Cobra in one hand is the PCB soldering, in another DP board in P-CAD.

                              good luck!
                              hi kt 315. why +12 at armor and not -12 l do not understand

                              Comment


                              • Originally posted by g.s View Post
                                hi kt 315. why +12 at armor and not -12 l do not understand
                                there is not a big difference what you take for shielding, +12 or -12. but in PI schematics GND line is +12 (look Carl's article about Hammerhead, for example). in Deepers the shield of cable and falsepanels are connected to +12 too - look attentionally on schematic of Alexismex http://www.geotech1.com/forums/showt...hlight=deepers

                                GND is CLEARLY +12V, no doubts.

                                Comment

                                Working...
                                X