Announcement

Collapse
No announcement yet.

LOBO ST tuning

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LOBO ST tuning

    Dears,
    I want to open a topic about tuning of Tesoro Lobo ST. My european warranty is out soon, and: What I want? I need, really, change factory set of circuit from hard positive to light negative. I know, I could lost advantage in black sands and alkaline, but I can lost this function with no doubt due places where I running.
    How to do it?
    Yea, I know, it will hell in headphones.... No problem for me, my others are in this mode (GB man.) and I am able control it.
    Which trimmer is it?

    Thanks
    litrfree

  • #2
    Done....

    Hi,
    my Lobo ST is running in "adjusted" mode now, I did play a bit with trimmer R33 (and K10 - only touch), and results are, after couple comparing test:
    1. Frequency probably move, cause other LOBO ST with the same 10x12 HOT had no disturbed it the same style as before. In distance 3-4 meters - no any didggg rhriigg in headphones, only no any signal. Fantastic, but dangerous for club trips.
    2. LST in disc mode in sens pure 10 and disc 2 and threshold 80-90% is going deeper then before (I cannot indexed other machines here, it is clear). Running over machines as have been never before.
    3. In my standard former settings - Sens in red but no in max, Thresh in max, disc 1 and half and some - it is first time unstable, now. I can heard coil moving! Great! If is targeted good metal, disturb noise is quite and you can heard "standard" LST goose noise - clean and straight.
    4. In this setting - adjusted - is better going in normal and for pinpointing switch to Black sand mode and it is OK.
    5. GB for disc is I suppose at this moment negative, nice negative.

    regards
    litrfree

    Comment

    Working...
    X