Originally posted by kt315
View Post
Announcement
Collapse
No announcement yet.
Delta Pulse
Collapse
X
-
-
Originally posted by pigeon View Posthi freedan3d
please the lcd file work correctly?
best regards
thnak you
I do not think DP - LCD selects any metal. The original HEX file can not run it. Replaces the mechanical indicator (status bar). Works for me, but I do not expect her selection of metal.
Comment
-
Apparently, the discriminator module "discriminator rar" published more ago, is a demo that can be executed 200 times, as can be seen in the Turkish forum.
The bars give a rough idea of metal detected.
regards
Jose
http://www.teknolojiekibi.com/index1.html
Comment
-
Originally posted by Jose View PostApparently, the discriminator module "discriminator rar" published more ago, is a demo that can be executed 200 times, as can be seen in the Turkish forum.
The bars give a rough idea of metal detected.
regards
Jose
http://www.teknolojiekibi.com/index1.html
Me too it appears on the LCD. (Without welcome words)
http://www.youtube.com/watch?v=-RYyT20ZLV0
http://www.youtube.com/watch?v=EUIdAg1ztOk
It seems to me that this is not the same as the Turkish solution. I think it's no discriminator.
Comment
-
Originally posted by szucs_g View PostPI really do not think the detectors are renowned for their skills for the selection. The depth sensitivity is good.
I do not think DP - LCD selects any metal. The original HEX file can not run it. Replaces the mechanical indicator (status bar). Works for me, but I do not expect her selection of metal.
I NOT INTERESTED IN HEX I WAN TO NOW IF THE PCB AND COMPONENTS ARE CORRECTE
THANK YOU
BEST REGARDS
Comment
-
Originally posted by pigeon View PostHI
I NOT INTERESTED IN HEX I WAN TO NOW IF THE PCB AND COMPONENTS ARE CORRECTE
THANK YOU
BEST REGARDS
yes this pcb and componnents are correct
it work very well
Its hex limited in on/off only
i solved this counter in pim-1 whit hex manipilation
it is not very important
------------------------------------------------
ill try to make another delta pulse pcb and i can start again
best regards
freedan 3d
Comment
-
Originally posted by freedan3d View PostHi pigeon
yes this pcb and componnents are correct
it work very well
Its hex limited in on/off only
i solved this counter in pim-1 whit hex manipilation
it is not very important
------------------------------------------------
ill try to make another delta pulse pcb and i can start again
best regards
freedan 3d
HI FREEDAN3D
THANK YOU VERY MUCH
GOOD LUCK
BESR REDARDS
Comment
-
-
Originally posted by freedan3d View PostHi pigeon
yes this pcb and componnents are correct
it work very well
Its hex limited in on/off only
i solved this counter in pim-1 whit hex manipilation
it is not very important
------------------------------------------------
ill try to make another delta pulse pcb and i can start again
best regards
freedan 3d
The card "discriminator rar". Correct?
thanks
Jose
Comment
-
i build delta pulse and i have problem
hi
first problem that the green and red led are light when connect 12 v
what the problem and need help to explain the function of damping resistor the value i use is 680 ohm
my coil is 31 turn with 0.4 mm and 19 diameter ask can i make shielded with aluminium foil and plastic case
i wait to help my and thanks
Comment
Comment