Announcement

Collapse
No announcement yet.

volksturm opt1 no sound

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • volksturm opt1 no sound

    I built a metal detector on this page:
    http://www.md4u.ru/vsm/VolksturmSSopt1(rus).gif

    I have no sound.
    On the output square wave my CD4024. Amplitude up to 10V. Frequency is 1648Hz.
    If you plug in a short 11 pin CD4024 is the base of the transistor VT1 to hear the sound. However, as shorts pin 10 and 11 CD4066 is silence. The sound disappears across the diode VD2.
    Do-10k resistor R47 must be specially selected?
    The audio amplifier as I put VT1 BC547 and BC557 as VT2 --- whether they are appropriate?
    Ask for suggestions ....

  • #2
    The metal detector will not work. Inwetter-5V is too weak, except that the marked X must be selected. I think autoor does not know what they should be, and for this one you will not help, because the schema is underdeveloped.
    Yours sincerely

    Comment


    • #3
      And if anyone might know how to improve this scheme to the detector work?

      Comment

      Working...
      X