Announcement

Collapse
No announcement yet.

IDX-PRO+VDI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by ashefr10 View Post
    HELLO, now that I finished my tgsl with 2 tones, I launched into the idx pro with 2 tones to see the difference. I wonder if I can use my coil tgsl for testing? or if we must rebuild a coil are what I can do a DD and what would be the values ​​for a number of turns DC 20 cm?
    what is the optimal coil, concentric or DD?
    You have to make another coil for IDX.
    Of TGSL does not apply to this unit.
    The inductances are very different.
    My coil DD27cm:
    RX = 260 turns, 0.20 wire more parallel capacitor 47nF
    TX = 34 turns, 0.60 wire more 1uF capacitor in parallel.
    They are the best results achieved so far.

    Comment


    • Originally posted by eduardo1979 View Post
      You have to make another coil for IDX.
      Of TGSL does not apply to this unit.
      The inductances are very different.
      My coil DD27cm:
      RX = 260 turns, 0.20 wire more parallel capacitor 47nF
      TX = 34vueltas, 0.60 wire more 1uF capacitor in parallel.
      They are the best results achieved so far.

      34 vueltas for TX ??


      34 turns ?

      Comment


      • 34 Turns.

        Comment


        • I can no longer set a geb effect on my tgsl since I put the card 2 tones . why ?

          Comment


          • I really feel the same. So you do not pass so you have to build the IGSL. The TGSL has separate channels for the balance of ground. Ferrous and non ferrous.

            Comment


            • Originally posted by eduardo1979 View Post
              I really feel the same. So you do not pass so you have to build the IGSL. The TGSL has separate channels for the balance of ground. Ferrous and non ferrous.
              I actually hope for a better functioning mode of 2 tones of idx

              Comment


              • Originally posted by ashefr10 View Post
                I actually hope for a better functioning mode of 2 tones of idx
                At the moment very difficult. The solution would be the Arduino.

                Comment


                • Originally posted by eduardo1979 View Post
                  You have to make another coil for IDX.
                  Of TGSL does not apply to this unit.
                  The inductances are very different.
                  My coil DD27cm:
                  RX = 260 turns, 0.20 wire more parallel capacitor 47nF
                  TX = 34 turns, 0.60 wire more 1uF capacitor in parallel.
                  They are the best results achieved so far.
                  hi eduardo ,

                  rx .tx henry ? and ohm ?

                  Comment


                  • Originally posted by tekin_efe View Post
                    hi eduardo ,

                    rx .tx henry ? and ohm ?
                    TX=1,7 ohms=0,59mH
                    RX=90,4 ohms=34mH

                    Comment


                    • Originally posted by eduardo1979 View Post
                      TX=1,7 ohms=0,59mH
                      RX=90,4 ohms=34mH
                      thanks eduardo. Have six videos shot in the field of soil I'm very curious about the power under the ground shot.

                      Comment


                      • 1€ coin 35cm.

                        Comment


                        • Originally posted by eduardo1979 View Post
                          1€ coin 35cm.
                          Do you have a chance to be a great show video capture

                          Comment


                          • No.

                            Comment


                            • Originally posted by eduardo1979 View Post
                              No.
                              okey eduvardo thanks .

                              Comment


                              • Discrimination of idx is more efficient than the TGSL?

                                Comment

                                Working...
                                X