![]() |
Strong signal from Ferrite
Hi
Last days I deal with the discovery of small treasure. I use L Rods or the generator with the rods. I located a point that also the two precedents shows me the existence of gold. Yesterday I used electrostatic field detector (it is use a long ferrite) and saw a strange phenomenon. In the particular space it gives me a very strong signal with direction from west to east. The same signal I take if I am moved 200m roughly left or right (north to south). I supposed that they is some magnetic field of ground and thus I went roughly 2 km more far. The detector does not detect any signal. Changed a lot of places once again the detector does not detect nothing.I went again in the particular point, and the detector again gave me a very strong signal. Exists case the signal emanates from the treasure that I search? Can a small treasure of 1000th 2000 coins create a so much strong field and in so much big distance Regards:) |
Hi Geo
Very interesting , is l rods help you find that location ? Best regards. |
…….. and if you are sure ,that location contain old gold coins , it is very good cause
For testing of remote sensing devices , pd or Lrods or …… |
Energy from buried GOLD
Quote:
|
Energies
Quote:
|
Quote:
Regards |
Quote:
Regards |
1 Attachment(s)
Hi Geo :)
If assume, buried gold be able emitted , …what stuff emitted from it ?? What emitting from gold ? if emitted frequency ,we can measure and determine It. only parallel tuning resonance, than amplifying it. Can you examine this method at that area? If I know, then be able construct Sharp directional tuned receiver for gold prospecting. This is only idea !!!!! :cool::cool: Best regards. |
Quote:
Best regards. |
Quote:
Hi, you mean that without the generator you use l-rods and works at few distance (for you) but using l-rods+signal generator you gain 500m range ??? But Geo... which kind of generator are you using ? Isn't something like the Dell's omnitron thing ? I mean... you inject something square wave into the soil... just have 20Vpp at output ? Personally I don't trust l-rods but maybe you're experienced with them or have some ability I haven't. I simply don't know, but the signal gen stuff seems interesting: how do you feel more detection range ? Just your idea or you actually found something that way ? :D Kind regards, Max |
Quote:
uhm... I think it couldn't be such easy stuff. If that way any am RF receiver tuned to that frequency will do the job of locating gold at distance, but it isn't! I think that (if something exist for real) it's not about a particular "frequency" but maybe some E-field variation around target: that will explain why many lrl are simple e-field detectors... but I simply can't see how they could be useful cause are too false signals addicted (randomic beeps). Kind regards, Max |
you better say what phenomenon make a electrical energy in a coil ?
be sure it's not ions as the some members said , the EM field make that and the ferrite is only for increase amplitude of detected EMF . it's not for battery effect and corrosion of a buried metal , i found some especially ancient gold items (above 90% pure gold) that kept in a resistant and dry place (with no electrolyte) and they had very strong EM energy . best regards Alex |
Quote:
Hi Max Ok, I offer to Geo this method because he found good condition area For testing remote sensing tools. Also I think seem you, so we assume buried gold, produced E-field, Then for detecting static electrical field, we need moving Ferrite antenna, until produce voltage at end of coil . What is your suggest? Best regards. |
Quote:
Hi Great Alex What type tools you did use? Best regards. |
I ask it before of Esteban ,in fix position sometimes signal disappear and sometimes it's permanent , it's no need to move the coil ( maybe it was from the very strong field and very slow shake of hand make the Electrical energy )
|
Energy from Gold
Quote:
The ferrous metals are the same material as the Planet(big magneto) so they not produce some measurable DIFERENCE in energies,as result,LRL not locate the IRON,and IRON BOX can mask a gold target. |
Quote:
Hi Max Long time to see you :) Without the generator, only with L rods i can locate some objects from 30, maybe and 50 meters. No good because i have a friend that can locate coins from 2 Km far !!! With the generator i can take signal at my rods from500m very easy. I use sine signal 20v P-P. I use the Farnell PSG-1000a (remember i wanted the schematic, i repaired it) and a ampl with TDA 2030 at the output. All at 25.5 v DC. Of course i found objects with the generator at long distance, but not every time accurary :angry:. Some times i put frequency for gold or coper i i find stones :angry::angry::lol::lol: Regards |
Quote:
Regards:) |
Quote:
Regards:) |
1 Attachment(s)
A photo from one test at the farm of a friend
Regards:) |
Geo
Interesting. Do you use with LRL rods? Regards Esteban |
Quote:
L rods are the only way to work with generator signal. Here at Greece it is a often way to locate objects from long range. The problem is that when the object is very heavy and long long time buried..... we lose the center of the objects :angry::angry: Regards |
1 Attachment(s)
Quote:
Hi Geo At carl MFD article , at the earth probe did use ,coil. Are you trying seem as Carl. Please more inform me . also please upload more picture In the matter. Best regards. |
Carl put that coil in MFD as a joke , cause he doesn't believe the LRLs at all.
This EM field make all the EM detectors even PI detctors to find the treasure place easily , not as the Geo claim over 500 meter or 2KM :eek: , but under 50m is possible . |
Hi GEO
what's the signal frequency that you show on the scope ? please send some pictures of your domplete device , Lrods & other components that you use . |
All times are GMT. The time now is 10:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.