View Single Post
  #2  
Old 12-12-2010, 04:14 PM
J_Player's Avatar
J_Player J_Player is offline
Guru
 
Join Date: Feb 2006
Location: California
Posts: 4,382
Default

Quote:
Originally Posted by Don Jose de La Mancha
Good morning J-player: You posted -->I thought the inventor was highly educated in a real long list of sciences. A grounded conductor cannot send out a signal!
**************

May I suggest checking on Tesla's ground based system for global cumunication.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
You also posted-->In fact, a 5 volt audio signal does not have enough power to broadcast into the air to become detectable more than a few inches
***********


Using just what to measure it by? If you can't hear it or measure it with conventional devices that does not mean that it no longer exists, or that it has not continued on to infinity, admitedly getting weaker, but never-the-less still existing.

Don Jose de La Mancha

"I exist to Live, not live to exist".
Tesla did not send a 5v signal from a processor to the ground. He sent high voltage and high current signals into the ground by means of a conductor that was embedded in the ground. I maintain no part of the circuit inside the H3Tec has enough power or voltage to be detected with any instrument you can supply more than a few inches in the air or ground, and no part of the H3Tec low voltage/low power circuit is embedded into the ground as Tesla's high power transmitters were.

I also maintain there is no part of the circuit in the H3Tec which has enough power to cause the metal rods to mechanically swing by means of connecting a single wire to either of the rods, whether the wire is connected to the signal or to the ground. Nor is there any mechanism installed in the H3Tec dowsing rods to cause a mechanical movement of these rods. The operator must cause these rods to move using his muscles along with the combined force of gravity.

Can you prove me wrong?
Or can you only ask irrelevant questions with intent to obfuscate the actual challenge being posed to H3Tec in this thread?


Best wishes,
J_P
Reply With Quote