Quote:
Originally Posted by ma330
HI TO ALL:
I WANT A LRL SCHEMATIC THAT NICE WORKING.
LRL MODELS 3 OR 1 ANTENNA.EXAMPLE Electroscope 301 OR Lectra Search X-60 .....
CAN ANY ONE HELP ME????
WAIT FOR YOU DEARS
|
http://www.geotech1.com/cgi-bin/pages/common/index.pl?page=lrl&file=reports/escope301/index.dat
The link above will take you to a schematic of the Electroscope 301.
However, I don't know exactly what you mean by "nice working". If you mean will it respond to your own ideomotor response, than yes it will do that. But you could save your time and expense of building such a device because the electronics in the 301
do not add anything to the response or the accuracy. You could get the very same results by just working with a bent piece of wire, or a bent piece of brazing rod.
Go to the link below, and you will find some very fine examples of bent wire L-rods that will perform exactly like an Electroscope 301.
http://www.geotech1.com/cgi-bin/pages/common/index.pl?page=lrl&file=/projects/lrl1/index.dat
Hope this helps....
