New videos from Morgan

[jimys]

hi morgan

1- i have question about this : the fine tuning in pdk-2 right turn open sensitivity and left turn close sensitivity???

2- this modification is to protect the fine tuning not turn without my order when i put it in any place

3- when i m find something like this i give you 10%

[IMG=http://imageshack.us/a/img27/5924/10015671.jpg][/IMG]

here one more photo from the mouth of the tunnel about 500 meters long.
in the tunnel with 100% hummidity the pdk-2 and the pdk-2,2 are very silence without any problem.
except targets

[IMG=http://imageshack.us/a/img6/6759/10015571.jpg][/IMG]

[dinyeper]

hi morgan can you turn me on mail please? ilhanlevent_04@hotmail.com

I want pdk2 from you.

[Morgan]

hi morgan

1- i have question about this : the fine tuning in pdk-2 right turn open sensitivity and left turn close sensitivity???

2- this modification is to protect the fine tuning not turn without my order when i put it in any place

3- when i m find something like this i give you 10%

[IMG=http://imageshack.us/a/img27/5924/10015671.jpg][/IMG]

here one more photo from the mouth of the tunnel about 500 meters long.
in the tunnel with 100% hummidity the pdk-2 and the pdk-2,2 are very silence without any problem.
except targets

[IMG=http://imageshack.us/a/img6/6759/10015571.jpg][/IMG]

Hi


1-chek if the FINE TUNING arrow is Clockwise or Anticlockwise,this is the position .

2-Yes,very good to protect the knob,but not forget that everytime you turn PDK´s ON the FINE TUNING must be in ZERO position and then proceed the calibration,otherwise the PDK will be erratic or out of tune.

3-Thats great,good luck for you and your friend.

Regards