PDK inside

[WM6]

Not very same design:

[Morgan]

Not very same design:

Thanks a lot, but lets see Adreas answer.

[Morgan]

other PDK-2.2

Adreas,how you go to TUNE this PDK ???
What do you say. I can do or not this is a question?
..this is the circuit of a PDK-2.2 ,is diferent : (post #13 photo)
My drawing and PCB two years ago.
All members can see the same philoshophy drawing PCB and my "signature" design.
My PCB as same "your" PCB or not?
Also this is a question

Here is other PDK-2.2, with diferent shape PCB boards.

Adreas,where is your DESIGN SIGNATURE in this one ?

[Morgan]

Here is other PDK-2.2, with diferent shape PCB boards.

Adreas,where is your DESIGN SIGNATURE in this one ?

I believe this one looks more beautyfull than that from Charris ,but more ugly they are better they work

[ANDREAS]

Here is other PDK-2.2, with diferent shape PCB boards.

Adreas,where is your DESIGN SIGNATURE in this one ?

No comments, only a pic

[vali]

???

[nelson]

Yes, this was the schematics i talk earlier and i new it was posted and signed by Andreas.

Morgan you must admit that you got your pdk from this schematics, because when i asked about your pdk design and if i remember well i told you about this schematic that you build over a pice of wood. Well here it is, this is the one i was asking about.

Now, we all know you had made some mods to this circuit, but this is just some minor changes on sensitivity and frequency (LC tank)

In conclusion, i think that if we need a working pdk or lrl, is just a matter to have a good field test like Morgan does, and then start to play with the circuit to get the signal, increse sensitivity and get the best RX frequency.

Regards
Nelson

No comments, only a pic

[WM6]

OK nelson, but where is clear schematic?

From those Andreas photo you cannot copy something useful. At least I am not able to reproduce something usable from those photo, are you?

There are hundreds of such schematics on web, and probably even Morgan don't know anymore which of those he took as basis.

At least, no matter of design, all those passive receiver work in LRL detection the same way, mean - no way.

I am sure that Morgan is copying this passive receiver circuit:

[ANDREAS]

As I said, I do not intend to present inside more PDK. This is Morgan's and he wants to do is his own right. Just give me the right to be personally involved with a circuit that I had left too long without worrying if someone told me "this is a clone."
The circuit can have many improvements if calibrate, if actual work, etc. When I have free time i build it with more modifications, I just have way to do tests without any doubt from anyone.
I try only one interesting point for me. A method for simple calibration via user in practice with a real sample-target
But if continued or ironic and comments from "experts", i will stop dealing "personnaly use".
Only a point morgan is correct 100%. My country this time 1-2 men build and sell 600euro PDK clones with same plastic-box, same knobs and same design. without results. Scrap machines and i see one with my eyes. If i find a photo i can publish here.
Morgan, I hope you understand me. I don't have anything personal with you, also I don't interested for your projects. I am only interested you stop comments and ironic and your friends or partners. Sometimes silence is gold and i love silence for long time, before start again something
best regards

[Morgan]

No comments, only a pic

Hello

this project still Alonsos PASSIVE RECEIVER pheraps with the signature Adreas ( Christi ? ) a friend ofered me this project and i decide to try it,as everybody knows i put photo and a video of this project and SAID THAT IT WORKS AS LRL ,however it works only with my MODIFICATIONS after change many FERRITES, also COILS and of course doing mods in TRANSISTORS and the obvious TUNING capacitor near the RX COIL,this is what is called the PDK-2,where is nothing to hide,is modifications by GEO,Esteban,Andreas,and MORGAN put it to work as a LRL,but there is a base in Alonsos Passive Receiver.


regards

[WM6]

My country this time 1-2 men build and sell 600euro PDK clones with same plastic-box, same knobs and same design. without results. Scrap machines and i see one with my eyes.

How do you know that "without results"?

I am sure that re-builders can claim valuable finding examples at huge distance. As you and any other LRL manufacturer.

[aft_72005]

Hello

this project still Alonsos PASSIVE RECEIVER pheraps with the signature Adreas ( Christi ? ) a friend ofered me this project and i decide to try it,as everybody knows i put photo and a video of this project and SAID THAT IT WORKS AS LRL ,however it works only with my MODIFICATIONS after change many FERRITES, also COILS and of course doing mods in TRANSISTORS and the obvious TUNING capacitor near the RX COIL,this is what is called the PDK-2,where is nothing to hide,is modifications by GEO,Esteban,Andreas,and MORGAN put it to work as a LRL,but there is a base in Alonsos Passive Receiver.


regards

Hi all
I think must be say something here , I asked from Geo , Morgan , Andreas , detectoman , to build really work LRL many times ago . Geo didn’t nothing only some pictures . detectoman Under my promise give me some data ( I am thanking from him) .
My request from Andreas , he help me with more data, and more circuits . also I am so thanking from Andreas .
Morgan , I gave you the circuit picture with Andreas name at below.
It was project which Andreas helped to me . I gave you this circuit without Andreas permit . I remember well that modified circuit easily detected 1.5 volt short circuit from 1 meter . also I asked Morgan , said me About Alonso Pd and other data .
But only Andreas data was very valuable for me , i did incorrect work , my false work was Without permit by Andreas, I gave circuit to Morgan . Andreas, I am sorry for my
False .

[nelson]

My friend

Just copy the know pdk schematics and also you can build my pcb that i posted earlier.
My pdk works, but it needs just some good adjustments for sensitivity and also to use the correct frequencies
I compared my pdk signals with another LRL that was factory build, and it detects almost the same with just diferent sensitivity
For me the clue is to do same has Morgan, to buried some gold or silver and then go for a field test. This is the only way to get a real signal from buried gold or silver.
Regards
Nelson

OK nelson, but where is clear schematic?

From those Andreas photo you cannot copy something useful. At least I am not able to reproduce something usable from those photo, are you?

There are hundreds of such schematics on web, and probably even Morgan don't know anymore which of those he took as basis.

At least, no matter of design, all those passive receiver work in LRL detection the same way, mean - no way.

I am sure that Morgan is copying this passive receiver circuit:

[nelson]

My friends stop comments in excess, just build pdk and go for some test on diferent frequencies that implies to retune frequency and sensitivity.
Also very important is to have a good field test (gold or silver buried for long time)

Regards

Nelson

Hello

however it works only with my MODIFICATIONS after change many FERRITES (FREQUENCY CHANGE), also COILS and of course doing mods in TRANSISTORS (TO GET MORE SENSITIVITY)and the obvious TUNING capacitor near the RX COIL (FREQUENCY RETUNE)


regards

[nelson]

I agree with you and just ask who help with TOTem schematics?

Regards

Nelson

Hi all
I think must be say something here , I asked from Geo , Morgan , Andreas , detectoman , to build really work LRL many times ago . Geo didn’t nothing only some pictures . detectoman Under my promise give me some data ( I am thanking from him) .
My request from Andreas , he help me with more data, and more circuits . also I am so thanking from Andreas .
Morgan , I gave you the circuit picture with Andreas name at below.
It was project which Andreas helped to me . I gave you this circuit without Andreas permit . I remember well that modified circuit easily detected 1.5 volt short circuit from 1 meter . also I asked Morgan , said me About Alonso Pd and other data .
But only Andreas data was very valuable for me , i did incorrect work , my false work was Without permit by Andreas, I gave circuit to Morgan . Andreas, I am sorry for my
False .