PDK inside

[folharin]

someone could read how many turns of wire is this drawing?

back to say that this capacitor c6 wrong, look the photos posted as morgan made pistol and reverse engineering this summer that the correct value is 220 nf

[Saiman]

i am too,Please for circuit diagram.

please post the schematic, or causes to this pdk folharin@hotmail.com ... best regards.

this is my e-mail : saiman20001@yahoo.com

[Savio]

Olá Morgan, tenho interesse em adquirir o aparelho que você aperfeiçoou e está comercializando, o último modelo desenvolvido por você, que acredito ser o PDK2.3. Meu e-mail: ssaviio@yahoo.com.br

Dear Morgan, please i need your e-mail. Thanks!

[Savio]

PDK2.3

بله، من به یاد داشته باشید، شما در حال درست را نداشته باشند، کارخانه آشکارساز، و ارسال آشکارساز به کشور خود؛ زیرا تقریبا غیر ممکن است تشریفات است.

با توجه به


yes,thats correct,i dont have LRL factory,its hobby.
The other problem ,is not possible to send PDK to your country becouse of formalities.

regards

Olá Morgan, tenho interesse em adquirir o aparelho que você aperfeiçoou e está comercializando, o último modelo desenvolvido por você, que acredito ser o PDK2.3. Meu e-mail: ssaviio@yahoo.com.br

Dear Morgan, please i need your e-mail. Thanks!

[Qiaozhi]

Olá Morgan, tenho interesse em adquirir o aparelho que você aperfeiçoou e está comercializando, o último modelo desenvolvido por você, que acredito ser o PDK2.3. Meu e-mail: ssaviio@yahoo.com.br

Dear Morgan, please i need your e-mail. Thanks!

Olá Morgan, tenho interesse em adquirir o aparelho que você aperfeiçoou e está comercializando, o último modelo desenvolvido por você, que acredito ser o PDK2.3. Meu e-mail: ssaviio@yahoo.com.br

Dear Morgan, please i need your e-mail. Thanks!

Please read the forum rules -> http://www.longrangelocators.com/for...ad.php?t=10526
and make your posts in English.

[pigeon]

Please read the forum rules -> http://www.longrangelocators.com/for...ad.php?t=10526
and make your posts in English.

hi all

where'is the complet projet...shematic pcb......

thank you

[enjoykin4]

Signore ANDREAS ,

feel free and comfortable to contact me - here on this forum or via email.

I think we together can design real working extra long range locator ..... and maybe some of Free Energy Devices using some principles of working LRL.

Why so little people can make and tune such device. Because is is a Metaphysic device - need new understanding of nature new priciples and new schematic ideas which have very little with conventional "official permited" electronics.


For the begining - the nature of "Gold signals" IS NOT ELECTROMAGNETIC but have very large influence on classicl electromagnetics. It is a new source - one of ELEMENTAL FORCES (from 7 in our universe).

Tesla had woked on it - made greta results and have been "terminated" by ************* - Morgan J.P and CO... in 1943.

Today we don't have FREE ENERGY, better life and many many more - because ******************************.

So i think it is time to chage all ************************************************


My email is
enjokin4@andex.ru
Russia


I wish ou luck and success
Best regards Enjoykin4

[Qiaozhi]

I have just had a complaint from another forum member.

Enjoykin4 - This is now the 3rd time I've had to warn you about posting insults. Please read the forum rules.
Any more posts like this and you'll find yourself taking a sabbatical from the forum.

[pigeon]

Very hard to balance my friend.

hi


someone have a pcb

best time

[vlf]

PDK 2.1 new

I am a radio amateur and my other hobby is the metal detecting.
I built this modificated PDK 2.1 (circuit and picture in appendix). My PCB is 70*30mm without LM371 circuit instead I use a separate step down pcb (18V input and adjust 9.0V out regulated). The inductance of the coil is 286 mikrohenry d70mm with 50 turns. I can switch several capacitors paralel to the coil for extr tuning. The PDK is ready it works for the first test outdoor. (but not with buried metal)
Test result: The sensitivity is very poor. After tuning the led shines if I touch the poti with the hand but when I turn the coil near metal no signal appears. I transmitt a VLF signal sinus wave into a short wire antenna in the range of 70-120khz no reaction farther than 15cm from the coil.
Anybody help?


Thanks in advance


VLF

[vlf]

PDK 2.1

Sorry I forgot the pictures.

VLF

[perzo]

HI ALL:Ithink If the coil is made with ferrite, the sensitivity for metal is better Further.
Sorry for bad my english.
Regards
perzo

http://s8.picofile.com/file/8323273900/DSC09733.JPG

[Nicolas]

I am a radio amateur and my other hobby is the metal detecting.
I built this modificated PDK 2.1 (circuit and picture in appendix). My PCB is 70*30mm without LM371 circuit instead I use a separate step down pcb (18V input and adjust 9.0V out regulated). The inductance of the coil is 286 mikrohenry d70mm with 50 turns. I can switch several capacitors paralel to the coil for extr tuning. The PDK is ready it works for the first test outdoor. (but not with buried metal)
Test result: The sensitivity is very poor. After tuning the led shines if I touch the poti with the hand but when I turn the coil near metal no signal appears. I transmitt a VLF signal sinus wave into a short wire antenna in the range of 70-120khz no reaction farther than 15cm from the coil.
Anybody help?


Thanks in advance


VLF

Bad coil read good my topic.

[putrechigi]

Hello everyone, I'm not here to criticize anyone but only to bring to light my results of 4 years of research with the morgan PD, after 4 years of tests in Italy in almost all environmental and soil conditions I can say that the my pdk version 2.1 if I'm not mistaken DOES NOT WORK !!!!! I'm not here to declare that the PDK is a rip-off but my data are todayadays and god knows only how much I wanted to find something with it, following the changes written by him on the condenser I opened the PD but it is practically covered by foam polyurethane and you run the risk of breaking the circuit in the cleaning. I'm here to write because 'I asked the problem to Morgan for more' unanswered days, I asked if I could send the pd paying for him to do the change but without an answer , I invited him to Italy paying all expenses for any test of my land without ever having an answer, I would like to know if someone is able to help me in cleaning and replacing the condenser thanks.
my invitation is always valid as the possibility to buy the pdk3
best regards to the whole forum

[putrechigi]

photo

photo of my PDK