Announcement

Collapse
No announcement yet.

PDK inside

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by putrechigi View Post

    my pdk version 2.1 if I'm not mistaken DOES NOT WORK !!!!!
    You are not mistaken.
    Such design is able to work as very poor metal detector from vicinity only.
    Global capital is ruining your life?
    You have right to self-defence!

    Comment


    • Mr WM6 , do you have a fonctionel LRL ???

      Comment


      • PDK-2.1 capacitor change,for Italy

        Hi

        all your emails I answer in geotech forum, its very strange that you didnt get them,however next time send mesage direct to my email


        you need to change the original capacitor for a 4N7 capacitorthat is not covered by epoxy foam, is visible in your photo.

        Comment


        • PDK-2.1 capacitor change,for Italy

          to change the capacitor remove the original that you can see in yout photo on the right,is the light brown ceramic capacitor near the blue cables that goes to the receptor coil

          change this one for other of 4N7 value and check for results in the field.


          DID YOU ALREADY MADE A FIELD TEST FOR LRLs ?

          a field test is very easy to build, just use the silver LOOP acording my instructions in previous threads, after one year underground the silver in field test is ready to use as energy field to test all kind of LRLs

          Comment


          • SILVER LOOP for LRL field test

            buried this silver wire at 40 cm with some salt, this is the fast ENERGY FIELD , the loop shape


            Click image for larger version

Name:	DSCF9301.JPG
Views:	1
Size:	542.5 KB
ID:	91612

            Comment


            • Hi morgan, i made several pdk's in the past but i cannot get the correct tune up of the coil and the tuning capacitor. My question for you is what is the correct coil for the pdk? I mean the correct coil specification like wire size, number of turns, coil diameter and if possible coil resistance. I think this information is very important for the proper functioning of the pdk. You are the only person in this forum who perfected the pdk the very reason i ask you this.
              I have observed that higher inductance make the pdk sensitive to electrical interference including long distance lightnings but cannot catch the phenomenon.
              The information that i ask you would be helpful to all pdk builders in this forum. Thank you...

              Comment


              • PDK field test

                I tell several times in this forum that is very important to create a field test for LRLs

                of course GOLD is expensive so need to make this silver LOOP according my instructions and the TEST FOR LRLs will be ready in one year

                it doesnt matter the number of PDKs you have built,you need a FIELD TEST to tune the PDK using diferent cap. values in paralel with the COIL,

                COIL consist of 40 turns 0,30mm wire in 6 cm diameter

                CAPACITORS for tuning

                6N8 is fine for mediterranean areas

                4N7 is fine for eastern countries and north of europe

                you can try capacitors start from 2N2 to 12N and try to get the best results

                Comment


                • Thank you for your good advice regarding the coil Franco, it is highly appreciated...

                  Comment


                  • answer

                    hello morgan I received your email this night, I thank you for the answer here on the forum, in addition to your ring I buried 3 silver coins, a pot in silver diameter 15cm 40 -30-50 cm deep I covered with earth and watered abundantly with water very salty. we update to 1 year while you renew also here (when you are free) the invitation to come to Italy all expense to do tests on Italian soil with your PDK3
                    best regards

                    hi
                    all your emails I answer in geotech forum, its very strange that you didnt get them,however next time send mesage direct to my email


                    you need to change the original capacitor for a 4N7 capacitorthat is not covered by epoxy foam, is visible in your photo.[/QUOTE]

                    Comment


                    • this information is for the Morgan PDKs

                      the Franco Italy LRL is diferent and I never build this project

                      Comment


                      • in answer to your email :

                        your is PDK-2.1


                        you can solder cables to the old capacitor pins, and take the cables outside the plastic box ,best place is on the top near the place of the original capacitor, if you put in diferent distances the capacitance may afect the detection if interfere to other components.


                        IMPORTANT

                        use only cap. values start from 2N2 and not more than 12 N

                        Comment


                        • PDK AND TREASURES

                          Originally posted by putrechigi View Post
                          Hello everyone, I'm not here to criticize anyone but only to bring to light my results of 4 years of research with the morgan PD, after 4 years of tests in Italy in almost all environmental and soil conditions I can say that the my pdk version 2.1 if I'm not mistaken DOES NOT WORK !!!!! I'm not here to declare that the PDK is a rip-off but my data are todayadays and god knows only how much I wanted to find something with it, following the changes written by him on the condenser I opened the PD but it is practically covered by foam polyurethane and you run the risk of breaking the circuit in the cleaning. I'm here to write because 'I asked the problem to Morgan for more' unanswered days, I asked if I could send the pd paying for him to do the change but without an answer , I invited him to Italy paying all expenses for any test of my land without ever having an answer, I would like to know if someone is able to help me in cleaning and replacing the condenser thanks.
                          my invitation is always valid as the possibility to buy the pdk3
                          best regards to the whole forum
                          yes,there are some reports that PDKs not work well, I add you to the list ,so we need to solve the problem WHY PDKs not work as LRL in some countries? According my experiments its becouse they are tuned in my country and there are variations in other countries,that can be adjusted with the right capacitor value.

                          I can tell you that some clients report to have found treasure with PDKs models 2.1, 2.3 and 3 ,most important treasures was found in Greece ,Turkey, also in my country I found recently two large treasures with PDK-3

                          I RECOMEND FOR THE PEOPLE WHO HAVE PDK TO START THE FIELD TEST WITH THE SILVER LOOP,THAT IS GUARANTEE THAT WILL CATCH PHENOMENON AFTER ONE YEAR BURIED. OTHER OBJECTS LIKE SILVER COINS OR SILVER RING ALSO GREAT BUT NEED MANY YEARS UNTIL YOU HAVE THE ENERGY FIELD READY FOR TEST AND FOR TUNING WITH DIFERENT CAPACITORS IN THE PDK.

                          Comment


                          • Originally posted by Morgan View Post

                            BUT NEED MANY YEARS UNTIL YOU HAVE THE ENERGY FIELD READY FOR TEST

                            .
                            Post mortem , for sure.
                            Global capital is ruining your life?
                            You have right to self-defence!

                            Comment


                            • MY FIELD TEST IS FREE TO TEST WITH LRLs

                              Originally posted by putrechigi View Post
                              hello morgan I received your email this night, I thank you for the answer here on the forum, in addition to your ring I buried 3 silver coins, a pot in silver diameter 15cm 40 -30-50 cm deep I covered with earth and watered abundantly with water very salty. we update to 1 year while you renew also here (when you are free) the invitation to come to Italy all expense to do tests on Italian soil with your PDK3
                              best regards

                              hi
                              all your emails I answer in geotech forum, its very strange that you didnt get them,however next time send mesage direct to my email


                              you need to change the original capacitor for a 4N7 capacitorthat is not covered by epoxy foam, is visible in your photo.
                              [/QUOTE]

                              I have here my field test,and all of you who want to try LRLs can use


                              GOLD MEDAL

                              SILVER LOOP

                              17 silver coins

                              and more objects...

                              last year in the summer was here to test LRL the forum member Silvino from Brasil, he saw how to tune a PDK-3 in front of the buried object, after many tests he decide to buy a PDK,later he report that have made a SILVER LOOP test in Brasil to try there his PDK, anyway those who not believe in the Phenomenon can ask him what he saw and learn here.

                              Comment


                              • Hello Morgan

                                why dont you disclose secret about stimulator coil in your pdk.

                                its not only the frequency problem in all working lrls, but also stimulator coil need to be tunned to correct frequency.

                                passive receiver with tda7000 like in dch85 work, but have many interferences and hard to be tuned.

                                also francoitaly both versions work, but catch noble and ferrous metals as i said francoitaly.

                                alonso pd heatkit gd348 plus passive alonso receiver work but is very unstable and very hard to be tuned, because many variables take part in detection.

                                my oppinion is the best lrl is alonso new one with big square aluminium loop, and toroidal transformer for impendance matching.

                                i know how to classify gold and silver or other metal targets but every one need own setup and own nulling. this is due to every metal has different frequency and passive reciver need nulling at that particular frequency.

                                i think to make multiplex passive recivers for detecting interesting for me metals. platinum and rare elements are at my price list at first position, and they are much valuable than gold or silver.

                                if you have any frequency information about rare elements, contact me. we could cooperate well, each in own country.


                                ps. i dont sell any lrl i've made like you. they are just for my and my friend.

                                regards
                                dragan

                                Comment

                                Working...
                                X