Announcement

Collapse
No announcement yet.

Crypton OBMD-2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crypton OBMD-2

    Here we are.
    You need more informations about OBMD-2?
    You need a video with NO edit?
    Please check the position of the knobs. The crypton's users will observe that the buttons
    of the device are in different posotion (depends the country).That means a real LRL machine
    must be calibrated in each country differently.

    enjoy
    .
    crypton's designer

  • #2
    dear andreas, all these you succes derivate of morgan initial lrl impulses, hurra for america! alonso put in hig to america builders, i look what here ring isnt 20 cms deep but 15 jiiji no lie good find mr andreas, what circuit has these? all new ic prototipes are derivate´ s alonso basic, may be your should gave morgan a gift how 1 new crypton unidad, soon the EE should accept builders lrls are winers, conventional md go dissapair, geo earlier also was lrl sceptic jaja

    aprecciable andres, yo miro que alli el anillo no esta a 20 cms de profundidad sino a 15, buen hallazgo señor andreas, que circuito tiene ese? seguro derivaciones del de alonso, impulsados por los de morgan

    Comment


    • #3
      Hi detectorman

      Crypton is Andreas design and is not insparied on Morgan PDK.
      You can go Crypton site and found the block schematic that shows crypton is a diferent machine.
      I own a Crypton, and also i had build a pdk that is still under work, but is working very sensitive, same has Morgan. But now i need to find the correct RX frequency for gold and silver. However, the way is detecting is not the same has Crypton does.
      PDK is insparied on Alonso and also Andreas old work. If you look close on the forum, you will find a schematic file from Andreas that is the inspiration for pdk builders. I think the picture that i attach here is from Morgan first tries of pdk base. Look at the botom of the page that shows the file was extracted from disk E: of Andreas files.
      Best regards
      Nelson



      Originally posted by detectoman View Post
      dear andreas, all these you succes derivate of morgan initial lrl impulses, hurra for america! alonso put in hig to america builders, i look what here ring isnt 20 cms deep but 15 jiiji no lie good find mr andreas, what circuit has these? all new ic prototipes are derivate´ s alonso basic, may be your should gave morgan a gift how 1 new crypton unidad, soon the EE should accept builders lrls are winers, conventional md go dissapair, geo earlier also was lrl sceptic jaja

      aprecciable andres, yo miro que alli el anillo no esta a 20 cms de profundidad sino a 15, buen hallazgo señor andreas, que circuito tiene ese? seguro derivaciones del de alonso, impulsados por los de morgan
      Attached Files

      Comment


      • #4
        hi

        congratulation andreas from the video obmd-2 work very well

        Comment


        • #5
          A new and very interesting video for you

          enjoy
          crypton's designer

          Comment


          • #6
            Originally posted by nelson View Post
            Hi detectorman

            Crypton is Andreas design and is not insparied on Morgan PDK.
            You can go Crypton site and found the block schematic that shows crypton is a diferent machine.
            I own a Crypton, and also i had build a pdk that is still under work, but is working very sensitive, same has Morgan. But now i need to find the correct RX frequency for gold and silver. However, the way is detecting is not the same has Crypton does.
            PDK is insparied on Alonso and also Andreas old work. If you look close on the forum, you will find a schematic file from Andreas that is the inspiration for pdk builders. I think the picture that i attach here is from Morgan first tries of pdk base. Look at the botom of the page that shows the file was extracted from disk E: of Andreas files.
            Best regards
            Nelson
            Hello Nelson

            Keep in mind,you and others,that i not take secret info about PDK to Andreas,i use his schematic that not work as LRL,and after many of MY modifications is working as LRL.
            The complete story about this picture (PDK-1 prototype) is here somewere in the Forum threads,not remember where.
            Why i use this schematic? becouse is very simple design,and deserve some time to try modifications,in the way to put it to work,and finaly it is workig for gold and silver prospections.

            regards

            Comment


            • #7
              andreas,begin,studies,and,tries,and,he,own,prototi pes,also,build,work,s,after,see,the,pdk,
              succes,then,andreasoptimizeheownsideas

              yo,recuerdo,bien,que,andreas,no,creia,en,los,lrls, y,que,empezo,a,creer,despues,de,ver,los,
              exitos,de,pruebas,de,la,pd,pero,el,implemento,sus, propias,ideas,y,modernizo,las,bases,de
              los,principios,de,funcionamiento,del,pd,andreas,es ,buen,investigador,y,sabe,como,expandir,l
              los,circuitos,andreas,empezo,su,negocio,arrancando ,desde,las,demostraciones,de,la,pd
              de,alonso,o,sino,digame,cuando,antes,andreas,const ruyo,un,lrl,?,ni,creia,mucho,en,ellos,al,igual
              que,geo,eran,mas,bien,escepticos,o,ya,no,se,acuerd an?

              Comment


              • #8
                the,first,lrl,working,in,europe,cloned,in,portugal ,by,morgan,was,the,alonso,pd,of,america

                Comment


                • #9
                  no,exist,in,pAST,youtube,lrls,succes,shows,anterio rs,at,pd,exit

                  Comment


                  • #10
                    the same old story over and over again:

                    persons are blaming and intruiging other persons instead of creating scientifical proven work ...


                    don't you ever learn - first create something real working that is of real use for others and not just a waste of 1000s of bucks and only after this you will have a right or law-status to protect your inventions.

                    if you are suggesting here that you would have a real working device but you can't prove it and other people lose alot of money for your "fantasy-products" you are just a criminal - betraying yourself (selfdelusion) or intentionally betraying others doesn't matter in that case!


                    If that original Alonso LRL really would have been working it would have been a huge success worldwide but it wasn't!

                    Not even the Mineoro stuff 20 years later works! This is proof enough!

                    So what do you want here, fight over a notworking schematic?

                    You may detect some EM-field (mainly earth-magnetical) anomalies with your - electronical seen extremly simple - receiver circuits but for shure you don't detect some hyper-secret gold and silver resonance frequency etc. mystical crap!


                    So the question is for what you are using this platform here at all?

                    Making promotion (or achieve business contacts even by PM after you made treasure-hunters wild and hot with your claims) to sell your doubtful inventions or - what would be much more meaningful - find out first on what kind of basis or principle any LRL-detection at all could work.

                    Because of being so extremly focused to be the owner of the hyper-genious LRL-circuit-rights you totally miss the solid basis of proven physical work.

                    btw. usually a non-directional energy source fades away by the square root of the distance - if the energy-level of a source at 4 meters distance has the value 4, then the same source if 8 m away has only the energy of value 1 (super-simplified explained). Thats the reason why usual MDs even with 1m coil have a hard job to detect stuff that is more than 5 meters away.

                    Comment


                    • #11
                      I purchased a crypton obmd-2 in hopes of selling here in the USA. I have been building and testing, studying LRL systems sinse 1985. I have located many small gold and silver unknown targets with my system. I've been watching this forum off and on about PDK type detectors.

                      Some people claim to have working PDK type detectors. I don't know if they do or not. I needed a unit to help pin point large targets. I received very good reports on the crypton detectors locating gold in Mexico. One of my best friends has one there.

                      I'm now testing the unit and have very good results. The unit claims to locate gold, silver and brass/copper in that order. I have located in testing small brass and have no doubt it will locate gold and silver also. I have one large signal in my yard I tracked from 75yards. I'm using that signal to learn adjustment of the unit. It may be a reflection because I live on the water and water may cause this. The small brass/copper pieces I found I tracked from around 5-6 meters.

                      I will have a page up on my site soon on the crypton. I will have video on the large target with the large signal. As I locate good targets I will add on my site.

                      Andreas is very helpful and has from my test a real all electronic long range locator that detects long time anomaly that forms over time on gold, silver and brass/copper. The crypton takes the human factor out from using rods and ideomotor.

                      I look forward to doing business with crypton. If anyone wants info on the crypton units please contact me.

                      Tim
                      Bringing metal detectors into the world of imaging!

                      sigpic

                      Comment


                      • #12
                        Hi Tim

                        My lrl has max sensitivity in east/west direction, the crypton has the same behavior?

                        Best Regards

                        Comment


                        • #13
                          Not that I can see. I have mapped the large test anomaly. I will post pic here in time.

                          I can approach good repeatable anomaly signal from all directions. I have not noticed N/S or E/W line detection.

                          This may because you can calibrate the unit for your area.
                          Bringing metal detectors into the world of imaging!

                          sigpic

                          Comment


                          • #14
                            Hi Tim

                            I am referring to a lrl designed by me, not to crypton. The only regulation is to set the gain for no compass/sky effect. My lrl is a passive receiver with a telescopic antenna. I'm glad that the crypton works well and this is a further confirmation that the phenomenon exists.

                            Best Regards

                            Comment


                            • #15
                              Yes I agree. As I go more places to test the unit I will know more. So far it looks very promising.
                              Bringing metal detectors into the world of imaging!

                              sigpic

                              Comment

                              Working...
                              X