LRL Recharged

[Baterista]

Hi Baterista.
It is long time that i reversed this pcb.
There are people who constructed it so i am sure it works. From what i see R6 is the R20 (560 R) at my schematic, and some capacitors are from the power supply. I suppose that you have and the (my) schematic of power supply.

Regards

Hi, yes, Geo, power supply schematic is your, thank you.

[DrTech]

PDC2001B

these are the corrections....

[Baterista]

these are the corrections....

Oh! DrTech, thank you very much by the corrections and by the your time spent, when I finish the corrections the PCB I'll open a new topic and post all the files.
best regards.

[Geo]

Hi baterista.
I am waiting for your Mineoro version.....

REgards

[detectoman]

A experimental prototipe whit four transistors in rx and one transistor by tx all power regulated whit lm317 to 3 volts very low consume was try 1.5 v. spark at 90 cms distance visit my electonician hobby site http://youtu.be/jtOZJXwRDH4

[detectoman]

other view of these tries, the oscilator tx, is a liitle circuit of one transistor sited below near the omega coil all work whit two 9 volts bateries `power regulated, has wave saw tooth, the circut experimental exposed at proxime new modification for most gain whit transistors changes and any other alteration look; http://youtu.be/E0xf68E-R-Q

[roccocoin]

hello drtech

these are the corrections....

hello drtech, you may aggiungiere the detailed parts list? thanks
the pcb I have to do the correct one with the red lines? and that correct? jumpers should I let him? thanks

[DrTech]

Ionic Chamber

Roco, I can send you all the information, the problem is to build:

1.- The ionic chamber.
2.- The antenna loop and calculate the ferrite toroid

You can tell as you go has build the ionic chamber?

For me it was easier to build LRL Passive Receiver PD with a coil, and you can get more distance with a ferrite antenna.