Announcement

Collapse
No announcement yet.

gold gun al707 or 718

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    what's te distance between the two windings ? and the total inductance ?

    Comment


    • #62
      I don't remember. Ferrite is closed in a plastic tube...
      Total inductance must be more than 30mH..
      Geo

      Comment


      • #63
        Thank you

        Comment


        • #64
          Originally posted by Geo View Post
          Until now i did n't find full schematic...
          The only that i found is the frequency selector.
          Varicaps have capacitance between 20 and 500pF (if i remember ok).
          Today i measured the frequency of each band using this selsctor.
          so i have

          1. 24.6 .... 30.5 Khz
          2. 17.8..... 25.5
          3. 14.5.....19.7
          4. 11..... 12.9
          5. 9.7 ......10.9
          6. 6.3 ......6.6 Khz

          As you see it receives directly from 6 ... 33 Khz (-10db).
          So with a good scan will find a strong vlf station inside one of all these bands.

          Geo

          Comment


          • #65
            very good method I need to know the position of the two potentiometers (tune and volume) thank you
            Attached Files

            Comment


            • #66
              What do you mean????
              Geo

              Comment


              • #67
                where i connect these two pots ( tune and volume ) in the diagram ?
                Attached Files

                Comment


                • #68
                  excuse me the tune pot is for the varicap
                  it remains that the pot volume which is not on the diagram

                  Comment


                  • #69
                    You must connect the other half of TLC272 to pin 8 of TL071 via 100n. Draw the same schematic with the other half and connect a potentiometer at output (pin1). Audio ampl must be at different box and far from lrl. GG is very sensitive to self-oscillations. Usyally i don't use the audio, only the meter.
                    Geo

                    Comment


                    • #70
                      Thank you

                      Comment


                      • #71
                        What do you think for this point?

                        Comment


                        • #72
                          Question to all who are in the subject. I understand correctly that there are two circuits, one on the TL084 is an earlier circuit and the second circuit is on the LM324.

                          Comment


                          • #73
                            LM324 and TL074 are similar ICs. No differences for this simple circuit...
                            Both are quad op amplifiers.

                            Geo

                            Comment


                            • #74
                              Originally posted by Geo View Post
                              LM324 and TL074 are similar ICs. No differences for this simple circuit...
                              Both are quad op amplifiers.

                              Too noisy without a signal to the station. I'll try to bypass the remaining two unused channels.

                              Comment


                              • #75
                                And I found why it was making noise, fixed it. Cool receiver.

                                Comment

                                Working...
                                X