dch 85 pistol

[abdou2014]

Thanks, when i test my dch its very sensitive to spark and static field, impossible to work on area near power line even if its about 1Km far, is it also for you ?

[abdou2014]

The TDA is for CAP reception, we can use two rx coils TDA and DCH , or use TDA as stimulator for DCH, The question for master members is : the TDA cap reception alone without DCH coil can capture the phenomenon ???

the adventage for TDA rx alone is the immunization to the interf?rences .

[abdou2014]

the real passive receiver of Alonzo is also cap rx, not what you found here modified as E-EM receiver, it work on VHF range

[aft_72005]

Thanks, when i test my dch its very sensitive to spark and static field, impossible to work on area near power line even if its about 1Km far, is it also for you ?

No. not sensitive to EM filed .

[abdou2014]

I understand that we do not have the same configuration, what type of field or energy is your DCH sensitive to?

[abdou2014]

I tried many configurations, like positioning the vhf oscillator in a way that it reacts only to non-ferrous metals a few centimeters from the antenna .... but I want to know which of these configurations you worked with ???

[BENZINAS]

Dch 85

Hi , does any of you sells his hand made dch pistol ?

[abdou2014]

I found 5 years ago with this config a target at 60 meters but at this time the tuning was on limiting zone broadcast

[aft_72005]

I understand that we do not have the same configuration, what type of field or energy is your DCH sensitive to?

Sfiled detector .

[aft_72005]

Hi , does any of you sells his hand made dch pistol ?

Hi
No for sell

[aft_72005]

I tried many configurations, like positioning the vhf oscillator in a way that it reacts only to non-ferrous metals a few centimeters from the antenna .... but I want to know which of these configurations you worked with ???

I already sent you a message in your private box, but you did not reply.

[aft_72005]

I found 5 years ago with this config a target at 60 meters but at this time the tuning was on limiting zone broadcast

DCH 85 has special settings that I think not everyone can do.
The receiver circuit must be adapted to the transmitter part. You must have done it. Because your circuit was sensed from a distance of 60 meters.

[abdou2014]

I already sent you a message in your private box, but you did not reply.

excuse me , here's my mail and tell me not the setting data only how test it and i understand

[abdou2014]

hakim2000pc@gmail.com

[aft_72005]

hakim2000pc@gmail.com

I sent you Email .