Lrl from Italy

[okantex]

hi
while getting close to end of second pcb..
I want to ask a question..
When I build my first zahori...I burned IC ..I think it was 2N35.. I realised that it was because of high voltage line close to my house
since the voltage is too high..on my outputs ... can it be because of AC high voltage
did you have any experience of HV..

[FrancoItaly]

Certainly high voltage lines affect electronic instruments but also the human body.
For the setup of my lrl it is better to do it far from this line.

[Pahom]

The Last video

the same target

https://www.youtube.com/watch?v=BQ3aaN044MA

enjoy it.

Here in this video you can clearly see, in the direction of izmiriy passes the road. And you can see how the bus rides. It seems that there the power line is going there. I think you are catching not a phenomenon, but the interference of passing vehicles (discharge on spark plugs). But from a very long distance.

[liudengyuand]

Obviously no one has ever succeeded, it can't detect metals, why is there anyone doing it?

[Morgan]

LRLs

If the amplification of the lrl is too large, in addition to the compass effect there is also the sky effect, i.e. lowering or raising the lrl you have a signal, the two effects can be combined making it impossible to use. The lrl is a directional instrument, the maximum sensitivity is proceeding from north to south, the minimum is proceeding from south to north and proceeding from east to west and vice versa the sensitivity is medium. Furthermore, approaching the target, the signal increases but cancels right on the vertical where the target is buried. I find it difficult to believe that a target at 500 m can influence my lrl, to be true it should behave as described above, i.e. approaching the target (i.e. at 500m) the signal first weak and then increasingly strong until it decreases and cancels over the target (500m ahead). My lrl like almost all the others ultimately reveals an electrical or electromagnetic signal and therefore is subject to many disturbances.

yes, most of times the PHENOMENON can be located only in two lines ,see the video,the gold ring was found only Nort to South and West to East, the digging tool is point to south direction, in the video is doing the pinpoint work

https://www.youtube.com/watch?v=X9fR_gBbp50

[roccocoin]

[ATTACH]18656[/ATTACH]

[ATTACH]18657[/ATTACH]

[ATTACH]18658[/ATTACH]

[ATTACH]18659[/ATTACH]

[ATTACH]18660[/ATTACH]

a greeting to all the components of the form and all imoderators and administrator, I am a friend of Franco, and I think it is not fair that Franco has posted his project and everyone has put it into action, while you have built it, improved it but don't make it clear nothing to anyone, do you think this is the spirit and sharing a forum? I asked someone someone outside of Franco answered me ...... good day

[Morgan]

franco italy

a greeting to all the components of the form and all imoderators and administrator, I am a friend of Franco, and I think it is not fair that Franco has posted his project and everyone has put it into action, while you have built it, improved it but don't make it clear nothing to anyone, do you think this is the spirit and sharing a forum? I asked someone someone outside of Franco answered me ...... good day

the images show the 3 frequencies optional for the PDK-2.3 , as I remember explain very well how to install this in PDK single frequency.

[Arthur]

LRL

Hi friends, as Franco said, this signal is stronger than the north, and tracking should start from the north. As you approach the target signal, the signal turns on, so do the same from the south. If the target is deep, you are in the line from north to south, ie two points, half the distance between the two target points and half the distance of the approximate target depth, good luck.

[FrancoItaly]

Hi friends, as Franco said, this signal is stronger than the north, and tracking should start from the north. As you approach the target signal, the signal turns on, so do the same from the south. If the target is deep, you are in the line from north to south, ie two points, half the distance between the two target points and half the distance of the approximate target depth, good luck.

Thanks for your contribution, I suppose you made my lrl and that you use it successfully. I invite all those who have successfully implemented it with positive results in the field to make it known to everyone, as there are several skeptics who do not believe that lrls work. This will certainly be useful for anyone new to this forum.

[roccocoin]

the images show the 3 frequencies optional for the PDK-2.3 , as I remember explain very well how to install this in PDK single frequency.

thanks morgan, very kind in answering me, but on the electronic base where to place the diverter?

[roccocoin]

Thanks for your contribution, I suppose you made my lrl and that you use it successfully. I invite all those who have successfully implemented it with positive results in the field to make it known to everyone, as there are several skeptics who do not believe that lrls work. This will certainly be useful for anyone new to this forum.

ciao franco, tutto ok ?
then I noticed that the stylus antennas that are magnetized do not work well on the electronic apparatus, while those that are not attracted to the magnet work very well, but in my part it is difficult to find these demagnetized antennas, how could I solve the situation on lrl at 3 led? thanks

[roccocoin]

Thanks for your contribution, I suppose you made my lrl and that you use it successfully. I invite all those who have successfully implemented it with positive results in the field to make it known to everyone, as there are several skeptics who do not believe that lrls work. This will certainly be useful for anyone new to this forum.

franco,hai fatto la versione dell'lrl con il 4066 ,non mi potretsi mandare le copie per farlo ? copia del layurt basetta e lista componenti e come vanno montati ? tieni presente che non sono un mago dell'elettronica questo gia lo sai .....la mia mail rocco.verrengia@virgilio.it .ciao e stammi bene.

[roccocoin]

poi.............

Thanks for your contribution, I suppose you made my lrl and that you use it successfully. I invite all those who have successfully implemented it with positive results in the field to make it known to everyone, as there are several skeptics who do not believe that lrls work. This will certainly be useful for anyone new to this forum.

ti scrivo qui perche non ho piu la tua mail, ne ho costruito anche un altro di quello di drenman con 3 led,funziona perfettamente ma ce un problema che non riesco a risolvere ; se giro il potenziometro del gain in senso antiorario mi accende subito i led in seguenza, ma se lo giro in senso orario cioe al max guadagno accende solo il primo (rosso) . dove sara il problema per te che sei molto bravo in elettronica ?

[Qiaozhi]

franco,hai fatto la versione dell'lrl con il 4066 ,non mi potretsi mandare le copie per farlo ? copia del layurt basetta e lista componenti e come vanno montati ? tieni presente che non sono un mago dell'elettronica questo gia lo sai .....la mia mail rocco.verrengia@virgilio.it .ciao e stammi bene.

ti scrivo qui perche non ho piu la tua mail, ne ho costruito anche un altro di quello di drenman con 3 led,funziona perfettamente ma ce un problema che non riesco a risolvere ; se giro il potenziometro del gain in senso antiorario mi accende subito i led in seguenza, ma se lo giro in senso orario cioe al max guadagno accende solo il primo (rosso) . dove sara il problema per te che sei molto bravo in elettronica ?

Please read the forum rules -> Rules of the Forum
and make your posts in English.

[roccocoin]

hello da italy

Please read the forum rules -> Rules of the Forum
and make your posts in English.

hello, in these 2 posts, I only spoke with francoitaly ......