Lrl from Italy

[hakandurmaz]

Thank you for your information.

[Rahman]

salam dost man faranko halt chatur est

[Rahman]

Hello to all members of this group.

[Rahman]

Dear Franco, I haven't heard from you for a long time. How are you?

[FrancoItaly]

Dear Franco, I haven't heard from you for a long time. How are you?

I'm better, thanks

[Rahman]

I hope you are getting better and better.

[Rahman]

Dear Franco, when we are exploring at altitude, the system becomes unstable. To solve this problem, if we do it at altitude, Caliber will do it. Or not?

[FrancoItaly]

Dear Franco, when we are exploring at altitude, the system becomes unstable. To solve this problem, if we do it at altitude, Caliber will do it. Or not?

I've never heard of this behavior, try decreasing the gain.

[Rahman]

This means that at altitudes above the ground, in high mountains, there is a lot of fluctuation. If calibration is performed, the fluctuation will decrease.

[gs78]

8 mhz franco pot wire is made more so that the wires are more stable than the wires.

[gs78]

The 8MHz Franco is not stable; the device is reacting on its own, causing problems.

[FrancoItaly]

The 8MHz Franco is not stable; the device is reacting on its own, causing problems.

Try decreasing the gain.

[gs78]

How can I reduce the profit? I used a 10 r12 2.k trimpot, T,R ler BC546

[FrancoItaly]

How can I reduce the profit? I used a 10 r12 2.k trimpot, T,R ler BC546

For R12, use a 10K trimmer; if that's not enough, do the same with R10. Also, decreasing C13/C14 decreases the gain. Have you read the Helps?

[gs78]

I read some help before, how can I tell if the gain has decreased using a multimeter?