Lrl from Italy

[LRLMAN]

Look at my post n.552, crystal oscillator must be active, TR2, TR3 and TR4 amplify a small part of the signal coming from the oscillator. If disconnects the Quartz there should be no output.

Hello dear Franco could you show the pcb with which you made the sensor 8 MHz and the other stages such as the display and all this as the image of the post 282, wich i analyze and compare it with the image of the PCB in post No. 213 and no seems with the image of the post 282, please could you show us the pcb like as in post 282?

Receive greetings and thanks for sharing your project, excellent.

LRLMAN

[FrancoItaly]

Hi LRLMAN,
unfortunately not in Italy, maybe you're right, the PCB are not the same, I did more than 10 lrls, however all the PCB are working, you should look at the wiring diagram when you make mounting the components on the PCB. Watch "My new FrancoItaly LRL" where there is the full realization of Sneshko: "http://www.longrangelocators.com/forums/showthread.php?t=19076"
that did a really good job. However the important thing is to try to avoid the auto-oscillations, as TR2, TR3 and TR4 are a high gain stage, it's better a pcb not too small, maybe double-sided with one side connected to ground.
Best Regards

[LRLMAN]

Hi LRLMAN,
unfortunately not in Italy, maybe you're right, the PCB are not the same, I did more than 10 lrls, however all the PCB are working, you should look at the wiring diagram when you make mounting the components on the PCB. Watch "My new FrancoItaly LRL" where there is the full realization of Sneshko: "http://www.longrangelocators.com/forums/showthread.php?t=19076"
that did a really good job. However the important thing is to try to avoid the auto-oscillations, as TR2, TR3 and TR4 are a high gain stage, it's better a pcb not too small, maybe double-sided with one side connected to ground.
Best Regards

Hello Franco in advance thank you very much, only i commented that I interesting to do your project but with PCBs that you made and I would like to ask if you can put an image of the face below the sensor (8 mhz) to see how this your connection to ground you say, and image how you connected the antenna and the antenna as it should be because I have a television antenna but do not know if this type of antenna used for the project or only i have to use only the RF radio type with metal tip?.

I say I want to see pictures of your PCB because I think they are better such as do the Teacher Alonso.

It's something I do not understand but that making the PCB's so as make Alonso, the LRL work well.

You would have some difficulty in putting images of your PCBs? when you come back to Italy? if you have your lrl in Italy.

Also I would ask the inductance of the coil L1 and the diameter of the wire, because I made several coils of different sizes as you said to Nicolas, which should be 10 mm x 10 mm and I can't get the inductance you told to Nicolas that was less than 1 uH, I measure the inductance and only get 1.5 uH minimum and not less with 1 mm wire diameter.

Best Regards.

Lrlman

[FrancoItaly]

Hi LRLMAN,
unfortunately I do not know when I return to Italy as part of my life is spent here in Switzerland with my wife who is not in good health.
You speak of the Teacher Alonso, but Alonso has nothing to do with my LRL that originated from an RF sniffer that's autooscillates and acted as a LRL.
For the moment the only pcb I can show you is on the forum but you can experiment with other pcb. Even the antenna is not critical, okay a stylus antenna or a tube of copper or brass from 30 to 40cm long. L1 also is not critical, diameter of wire is about 1mm, 10 x 10mm with 3 turns it's ok, also 2 turns work well and the inductance is not important, my instrument is not very accurate.
Best Regards

[enjoykin4]

ПРИВЕТ ВСЕМ НА ФОРУМЕ !!

Hello FrancoItaly and all LRL team/s at this forum and around the world.

This is my first post here. Thanks Carl and Qiaozhi from geotech.

Franco - I was reading whole your thread and have got a strong desire to replicate all of your LRL lasers (PD).

Franco would you be nice and friendly and public all yours PCB's and components layout for your last 4th builds.

version 1 - self-oscillating version using both sidee pcb epoxy as parasitic capacitor. I need both sides in 1:1 ratio.

version 2 - as is from PICT0751.jpg. I only need right dimensions in mm for pcb so i can adjust aspect ratio for 600dpi laser printing.

version 3 - with PLL 4060. I have schematic but need your original pcb layout and silkscreen.

version 4 - quartz lrl at 8MHz. Also i have schematic but no pcb and silkscreen.


FrancoItaly - if you are interesting i think i knew a answer on mystical phenomenon you have caught. Taking in account my older anomalies research in that area of physics (i really like nature "anomalies") i knew 100% that phenomenon really exist and have natural source just like a universe surrounding us. Also phenomenon is exellent masked but not intentionally from anybody will at universe or wider (in other universes). The point is as a matter of fact in very complex organization on nature hierarchy , which possess multlevels fractal anisotropy as primary building structures for different spatial dimensionality. Very shortly answer for mystical phenomenon is The Second Magnetic Field H* = - div A, (A is vector potential) and his non-electrical properties on physical density matter.

ps: Quote D'Arsonval:
«Anything is possible. But one must not accept anything , except that which can be experimentally proved. The ideas of an insane person differs from the conceptions of a genious , mainly because experiment invalidates the former and confirms the latter.»


That's all for now.
I wish good luck to all in gold hunting.

Reg,
Enjoykin4

[LRLMAN]

Hi LRLMAN,
unfortunately I do not know when I return to Italy as part of my life is spent here in Switzerland with my wife who is not in good health.
You speak of the Teacher Alonso, but Alonso has nothing to do with my LRL that originated from an RF sniffer that's autooscillates and acted as a LRL.
For the moment the only pcb I can show you is on the forum but you can experiment with other pcb. Even the antenna is not critical, okay a stylus antenna or a tube of copper or brass from 30 to 40cm long. L1 also is not critical, diameter of wire is about 1mm, 10 x 10mm with 3 turns it's ok, also 2 turns work well and the inductance is not important, my instrument is not very accurate.
Best Regards

OK Dear Franco, I try to make the last project of the 8 MHz and proves in my test area where I buried three silver coins for two years, eight gold rings buried 6 months and 15 copper coins buried two years and I have several prototypes but I can not detect anything with any lrl of which I have.

about what i tell you about Alonso, just telling to you that your pcb resemble to drawn of Alonso's PCB, But i not told you that your project was Alonso, Sorry for not making me understand.

I send a greeting and a hug and wish the health problem of your wife get better soon.

Lrlman

[LRLMAN]

OK Dear Franco, I try to make the last project of the 8 MHz and proves in my test area where I buried three silver coins for two years, eight gold rings buried 6 months and 15 copper coins buried two years and I have several prototypes but I can not detect anything with any lrl of which I have.

about what i tell you about Alonso, just telling to you that your pcb resemble to drawn of Alonso's PCB, But i not told you that your project was Alonso, Sorry for not making me understand.

I send a greeting and a hug and wish the health problem of your wife get better soon.

Lrlman

And now finally I want to ask you......... how it should be the pcb face down for this lrl? It has copper tracks? or is all full of copper? They must be joined to ground?

greetings.

Lrlman.

[enjoykin4]

Dear FrancoItaly

I have sent this message to you here only because i coudn't send private mail because:

Quote:

"enjoykin4, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation."

so i am writing here.
............................

I am sorry about your wife is not in good healt. I think i can help you - even if your wife is in last stage of illness.

Currently in Russia exist one very special healing device - special healing technology which name is СВЕТЛ - in translation it means LIGHT, which already has helped many people to get their good health back. It is very special device and vey special cosmic technology of Russian academician - nuclear physicist Nikolai Viktorovitch Levashov (1961-2012).

His official site
http://lлевашов.рф

http://levashov.ws

Don't trust any lies from any internet source about him (soon one day , you will know why) , and his wife Svetlana (1964-2010) and his/her healing technology. My only advice - try it- try this device SVETL and see healing influence at your wifes life. This device is 30 century technology and i am not a lier about it. I am an physicist not seller or shop assistant. I just want to help you and your wife informing you about.


Russian academician Nikolai Viktorovitch Levashov


Duchess Svetlana Levashova De Roghan Obolenskaya

One short journey to Sank Peterburg will forever change both of yours life at good.
I advice personal reception and contact with RNTO team - Russian Science Technical Society.

For more information contact mail at Russia.


телефон: +7-916-612-19-83
электронная почта: support@svetl.org
Aдpeс: rnto@mail.ru

http://rnto.club/

http://rnto.club/kontakti.html

ps: Quote D'Arsonval: «Anything is possible. But one must not accept anything , except that which can be experimentally
proved. The ideas of an insane person differs from the conceptions of a genious , mainly because experiment invalidates the former and confirms the latter.»

Volhv Enjoykin4 «In quantum physics - there is no difference between Magic and anisotropic realities. Life is Magic and Magic is Life. There is only real light AR RA and real darkness MAR RA».

Good luck
Reg. Enjoykin4

[WM6]

Hi enjoykin4

One thing is, if we are talking about empty hope in case of LRL's and another, if it is about human been health.

I don't like your easy ethic approach with your unapproved promises when you saying:
"I think i can help you - even if your wife is in last stage of illness."

At least your "all-healing" device named Light, didn't work in cases of device inventor and his wife, both passed away. What more proof you need that your "Light" is one healing scam more in an endless series of para-medical fraud?

And you are asking for proof citing D'Arsonval: "... one must not accept anything , except that which can be experimentally proved."

It is clearly experimentally proved, that, if device didn't work in case of device inventor and his wife, then there is no hope that those empty hope device will work for others people in hope too.

Empty hope devices works only to empty pockets of hoping people, nothing else. All other is question of problematic ethic or even a crime.

[FrancoItaly]

Hi LRLMAN,
the pcb face down is full copper and it must be joined to ground.
Best Regards

[FrancoItaly]

Hi enjoykin4,
My LRL isn't lasers (PD), not any laser and not infrared led or sensor. as I said basically it is an Rf amplifier (8Mhz if you use 8Mhz quartz) that's "modulated" by the "phenomenon" as we call the principle that makes possible the detection at a distance of meters or tens of meters. Input tank is in the range of FM (about 100-150Mhz). At the moment all the material is on the forum (pcb and schematic). I build more than 10 lrl but the pcb are drawn by hand without the help of programs and the drawings are not very clear. I counsel you to achieve first the 8Mhz version that I think it's the better. The self-oscillating version is too critic and it is not recommended. The CD4046 version works well but it is a little more complicated to build. A member of this forum told me privately that he had made a good discovery with this version. You may email to me at "sandokan51@libero.it".
Best Regards

[enjoykin4]

Hi enjoykin4

One thing is, if we are talking about empty hope in case of LRL's and another, if it is about human been health.

I don't like your easy ethic approach with your unapproved promises when you saying:
"I think i can help you - even if your wife is in last stage of illness."

At least your "all-healing" device named Light, didn't work in cases of device inventor and his wife, both passed away. What more proof you need that your "Light" is one healing scam more in an endless series of para-medical fraud?

And you are asking for proof citing D'Arsonval: "... one must not accept anything , except that which can be experimentally proved."

It is clearly experimentally proved, that, if device didn't work in case of device inventor and his wife, then there is no hope that those empty hope device will work for others people in hope too.

Empty hope devices works only to empty pockets of hoping people, nothing else. All other is question of problematic ethic or even a crime.

OK WM6 - TO BE HONEST

I DO NOT LIKE YOU AND DO NOT LIKE YOURS SLOVENIAN WORLD-OUTLOOK AT ALL !!!!

You said "THE CRIME" !!

What do you know about "THE CRIME" ?? NOTHING !!

What do you know about Nikolai and Svetlana Levashov ?? NOTHING YOU KNOW !!

How many his and her books you have readed ?? NO ONE BOOK !!

You never heard only one sentence from the lips of Nikolai and Svetlana. Am I right !! Yes of course - because i am telling THE TRUTH !!

What are you know about extraordinary experiments by Svetlana and Nikolai - not only in Russia but also in France and States ?? NOTHING YOU KNOW ABOUT !!

What kind of man you are ??

SOME KIND OF GURU DEVA which has already all answers even before was asked about ??

Or maybe you have been born with all UNIVERSE wisdom and completeness of knowledge requirement ??


FOR YOUR INFORMATION - NIKOLAI AND SVETLANA WERE KILLED BY SECRET JEWISH WORLD GOVERNEMENT (JEWISH ILLUMINATI CABAL). SVETLANA IN FRANCE 2010 IN THEIR CASTLE AND NIKOLAI IN MOSCOW 2012. GOT IT !!

MORE INFO FOR YOU SMARTY !!

BOTH WERE KILLED WITH PSY WEAPON KNOWN AS "MUSIC IN STONE". THAT WEAPON HAVE ONLY WORLD GOVERNEMENT SPECIAL SERVICE - WHICH IS INDEPENDENT FROM ALL INTELLIGENT AND SPECIAL SERVICES IN THE WORLD. THAT WEAPON CAN BLAST YOUR HEART IN PART OF MILLISECOND. DO YOU KNOW WHAT ANY FORENSIC MEDICINE WILL FIND IN THAT CASE ?? NOTHING !! GOT IT !! AND THAT WEAPON IS REAL AND USED IN MANY CIRCUMSTANCES BY SECRET JEWISH BANKERS WORLD GOVERNEMENT !!

YOU COUNTRY SLOVENIA IS UNDER THEIR RULES !! GOT IT SMARTY !!

NEXT TIME READ MUCH MORE AND INFORM YOURSELF BEFORE YOU MAKE FURTHER ANY EMPTY PRESUMPTIONS AND FALSE CONCLUSIONS.

HAVE A LONG NIGHT SMARTY !! GOT IT !!

[enjoykin4]

ok folks - now back to lrl/s.

Thank you Mr. FrancoItaly !!

I am plan to replicate all your builds first because the SCALR PHENOMENON and second about THE GOLD. I like both !!

Yes - I know it is unusiual Rf amplifier , with unusual mixer stage. Because that I also know that oscillator, input stage and mixer are critical for catching PHENOMENON. Especially are critical position and property of coil L1 in respect to outer Antenna. Also part of RF power you are leading to the outer antena and aground via capacitive coupling. Your grounding is in one point and all return currents go in that point and out via outer aluminium case.

How do you sure you Rf amplifier does not emitting nothing out of body case ?? What if does ?? What if emit - but not standard vector EH-field (rot A) but Scalar field (- div A)? You can't catch any Scalar transmission wia standarn EH receivers. You need a quite a new concept.

Any idea how to do it Mr.FracoItaly ??

I think will be very usefull for detail analyse - your recored of complete LRL RF spectrum as wide as your spectrum analyser can !!

I wish you best luck you and your wife

Will be in touch.

Reg.
Enjoykin

[FrancoItaly]

Hi Enjoykin,
I know very little about scalar waves and I think that it's very difficult to work about. Your analysis on the operation of my LRL is correct and no doubt the influence of the human body is remarkable and it is for this reason that I recommend using a handle very long (25-30cm) to keep the LRL far enough away from the body. As for the shield does not consider it indispensable as I built several units without shielding and work well. As for the origin of the "phenomenon" much it has been said in this forum. I think acting on a wide range of frequencies, for my LRL is the FM frequency and so I think that for proper operation as LRL must be radio emission in this frequency range. Changing the range will need to change the stage mixer.
Best Regards

[enjoykin4]

Ciao stimatissimo signore Franco !!

Thank you for informations.
Tell me honestly how did you caught PHENOMENON effect - it is almost impossible thing ??
10 times caught the same PHENOMENON is your greatest success !
It means Italian Golden Eldorado gates were opened for you and your command. !



ps: Signore Franco i am thinking about differential configuration of your Scalar receiver. Also PLL version is special interesting for me - because i can meassure very precise phase shift of incoming signal. Only thing i need is Reference Phase - and that reference should not be PLL oscillator. I need something very stable - with a very low jitter (phase noise). For example independent rubidium oscillator placed in field like phase marker. Do you have any idea how PHENOMENON influent crystal lattice or semiconductor structure. Maybe the whole "trick" is not in mixing frequencies but in some sort of semiconductors lattice deformation ? I wish i have answers on these questions.!

Good Luck and best rergards.

Sincerely Enjoykin4