Lrl from Italy

[FrancoItaly]

The compass effect is a drawback which occurs when there is too much amplification and is not due to a malfunction of LRL. You can avoid only by decreasing the amplification.

[abdou2014]

I noticed when building Franco LRL we have two type of receiver
The first is very sensitive to all that is static or magnetic
The second is not influenced by electromagnetics like television, on the other hand it detects the scalar field as the spark of an electrical contact .
Naturally it is the second that reveals the phenomenon
Mr Franco
How to convert the first LRL to the second LRL ???

[mustefa ubram]

The compass effect is a drawback which occurs when there is too much amplification and is not due to a malfunction of LRL. You can avoid only by decreasing the amplification.

How to test the effect of Compass?

[FrancoItaly]

Hi abdou2014,

My lrl has only a type of receiver, the phenomenon is picked up by the antenna and it is an electromagnetic signal or an electrical signal.

Best Regards

[FrancoItaly]

Hi Mustefa,

The compass effect is due as already mentioned the excessive amplification and manifests as a signal that occurs in the north / south direction always with the same intensity by moving in this direction.

Best Regards

[liudengyuand]

Why nobody speak, disappointed?

[mokkethon80]

dont think tomuch😂

[darkman]

Why nobody speak, disappointed?

Because all who Made, franco lrl (aworking 1) .. just like you , are not Answering our questions about changing component's ,, just franco did ,, thx

[liudengyuand]

Because of the machine, I got a huge wealth, I detected a lot of gold and silver and bronze, if you haven't succeed in doing, you can ask me why, I will guide you how to adjust

[darkman]

Because of the machine, I got a huge wealth, I detected a lot of gold and silver and bronze, if you haven't succeed in doing, you can ask me why, I will guide you how to adjust

Ok , my lrl detect florescent lamp and mobile signal but didn't detect bored copper and selver , output voltage=5vdc , guide me how to adjust

[taxma1981]

hi,franko this lc circuit it ok for more sensitive?

https://postimg.cc/image/i8ckyibjl/

[liudengyuand]

Voltage output size is no relationship, if you are using a single sided PCB its output voltage is much higher than the double coated copper PCB, the key question is how to capture the metal signal

[liudengyuand]

Who need help can leave your E-mail, I'm not familiar with this BBS, will not send documents and pictures

[FrancoItaly]

You must try.

[taxma1981]

hi,franko this lc circuit it ok for more sensitive?

https://postimg.cc/image/i8ckyibjl/

Frankoooooo