Lrl from Italy

[liudengyuand]

Don't let more people wasting energy, you don't have tested, you is a lie

[PanosP]

You do not need LRL to get such targets everywhere in civilized world.
You need simple to dig hole everywhere and get such crap.
This video does not prove anything.

What did you think that I would burry a treasure chest for two years and then find it so you would believe me ????

I’m not interested in convincing any one ……
Whomever it may concern can try for themselves

[PanosP]

Μπράβο Παναγιώτη πολύ καλή δουλεία!!
Exellent job,
What about the second antenna?
In your video there are two telescopic antennas
How you connect them?

Hello friend ionios

Both of the antenas are connected to one but if you use one you find the target better ..

[/url]screenshot

[pigeon]

thank you

Hello friend ionios

Both of the antenas are connected to one but if you use one you find the target better ..

[/url]screenshot

NICE JOB

[folharin]

Good job!

[abdou2014]

CAN YOU SHOW US THE HAND OF YOUR LRL. NICE GOOB THANK YOU.

[FrancoItaly]

Hi All,
I post here a new power stage and a modular display stage, one transistor for each led, no zener diode, this with the aim to further simplify the display stage and with the possibility afterwards to add other LEDs.

Best Regards

[PanosP]

[/url]screen cap

[/url]free jpeg images

[abdou2014]

THANK YOU

[ionios]

Nice job panagioti,
but I have seen you use
Different crystal this one is not 8 mhz,
And the coil you are using is air coil not
Ferrite coil,
You have better result like this?

[abdou2014]

The frequency range of the phenomenon is from 60Khz (or less) to infrared. I think that each country has certain frequencies that work better than others. The only way is by trial.

Please Mr. Franco, how far from the target this frequency can be revealed.
Or what is the maximum range of this frequency from the target ?

[PanosP]

Nice job panagioti,
but I have seen you use
Different crystal this one is not 8 mhz,
And the coil you are using is air coil not
Ferrite coil,
You have better result like this?

8mhz crystal !!!
With ferrite coil did nothing

[FrancoItaly]

Please Mr. Franco, how far from the target this frequency can be revealed.
Or what is the maximum range of this frequency from the target ?

This frequency can not be physically measured, but you can only see the effects on the metal buried varying L1 / C10.

[abdou2014]

I'm not trying to measure, but if I calibrate LC on this frequency, how far from the target I can have results ?

[FrancoItaly]

I'm not trying to measure, but if I calibrate LC on this frequency, how far from the target I can have results ?

the phenomenon has a very wide frequency range, it comes to finding the most suitable, then L1 / c10 must be varied to have the most large signal (DC output). More could not tell you.