Lrl from Italy

[FrancoItaly]

I remind you of a tip I have given before, ie it is better to shield (with aluminum foil) all the lrl, including the handle (of course you need to connect the shield to ground).
You will find that by gripping it with 2 hands the sensitivity increases considerably, making the difference if the phenomenon is very weak. For example if with one hand alone you have 1 led on with 2 hands you have 3 led on, i.e. the maximun sensitivity. Or one hand = all led off,
2 hands = 1 led on. In addition, the sensitivity increases by lengthening the antenna.

[kaligula]

I remind you of a tip I have given before, ie it is better to shield (with aluminum foil) all the lrl, including the handle (of course you need to connect the shield to ground).
You will find that by gripping it with 2 hands the sensitivity increases considerably, making the difference if the phenomenon is very weak. For example if with one hand alone you have 1 led on with 2 hands you have 3 led on, i.e. the maximun sensitivity. Or one hand = all led off,
2 hands = 1 led on. In addition, the sensitivity increases by lengthening the antenna.

I know, but I want first to try without shild because the metal enclosure can affect lc constant. I noticed difference, better recponce with right or with both hands. I'm not home now, when I'll back ill experimenting with tw6 transmitter, and also I'll make ardiuno frequency player from 30 to 100 khz. But I don't know does I caN transmit it through speaker or it will need to go through some transmitter

[kaligula]

I have another problem too. When I measure voltage of emitter of tr5 or at the end of sensor stage with multimeter there is no problem. When I conect the voltmeter which I installed in the device the voltage drops. At tr5 emitter connected it goes 4,5v, at end of sensor stage is around 5v. When the circuit is affected at tr5 connected voltage goes up more then 5,6 v. And two leds are on. At strong signals and three leds going on. When I conect it at end of sensor stage the standby voltage is bigger, but only one led goes on, never two or three

[FrancoItaly]

I have another problem too. When I measure voltage of emitter of tr5 or at the end of sensor stage with multimeter there is no problem. When I conect the voltmeter which I installed in the device the voltage drops. At tr5 emitter connected it goes 4,5v, at end of sensor stage is around 5v. When the circuit is affected at tr5 connected voltage goes up more then 5,6 v. And two leds are on. At strong signals and three leds going on. When I conect it at end of sensor stage the standby voltage is bigger, but only one led goes on, never two or three

It is normal that the sensor stage output changes when it is in the box and even approaching the hand, so I suggest a handle about 25 - 30 cm long.

[liudengyuand]

With trumpet tr3.4.5 three transistors

[havoc88]

Hello Franco and friends.
I have a problem in sensor output R16/C18. It's always 7.25v no matter what I do.
Any ideas/suggestions? I 've checked everything. I m using a 8MHz crystal oscillator.

Thanks !

[kaligula]

Hello Franco and friends.
I have a problem in sensor output R16/C18. It's always 7.25v no matter what I do.
Any ideas/suggestions? I 've checked everything. I m using a 8MHz crystal oscillator.

Thanks !

And if you touch the antenna nothing is changing you have problem in sensor stage. Or try with twisted wire on the place of three capacitors from one pf. I have put pictures in older post.how it looks. This will decrease the voltage and maybe will solve the problem

[FrancoItaly]

And if you touch the antenna nothing is changing you have problem in sensor stage. Or try with twisted wire on the place of three capacitors from one pf. I have put pictures in older post.how it looks. This will decrease the voltage and maybe will solve the problem

Yes the signal from oscillator is too high or the stage is self oscillating.

[havoc88]

Thanks Franco and Kaligula for your answers.

[kaligula]

Special video for our master and friend Franco

https://youtu.be/5D9qZKbv69M

[liudengyuand]

Do not imagine it has a role, just exercise your diy hands-on ability, no other meaning

[kaligula]

Do not imagine it has a role, just exercise your diy hands-on ability, no other meaning

We'll see

[liudengyuand]

The world simply can not use lrl

[kaligula]

The world simply can not use lrl

If you're here to proof that lrl is not working than there's no need to lose your energy. For this type of devices I don't know does they're working or not, so for now I can't say nothing. But with other devices I have few successes, so your opinion please keep it for yourself. Your destructive energy please update it in something more useful
ps
You can go on Geotech forum and find some good.metal detector schematic and build it. Why you're loosing your time here..

[kaligula]

So, now i tried reaction of lrl Franco Italy and pdk A13 of Nicolas with transmitter of Fisher TW6 , so Franco Italy has no reaction of tw6 at all.PDK A13 has wide range of reaction with changing the capacitor form 1,5 nf to 47nf. But Franco Italy is reacting of other targets whose pdk a13 can't reach. So now we have to see on terrain what will be the reaction. By the way I'll make and Totem and we'll keep trying.