Lrl from Italy

[Dubulumach]

Hello FrancoItaly

I am ready for big Roman's gold quest in MOESIA SUPERIOR.

to all.
Alonso PD and Morgan PDK work. And work excellent. You have all needed data on forum. Just read all posts from LRL masters Esteban, Geo, Morgan, FrancoItaly to complete mosaic.

Franco Italy PLL LRL work with some modifications.
Zahori also work with modifications.

Thats all folks. MOESIA SUPERIOR is waiting tomb riders.

Good luck.
Dubulumach

[abdou2014]

I think I will come a day

[Dubulumach]

[Dubulumach]

Yes, Tabula Traiana is a Roman's monument dedicated to the Roman Emperor Trojan, which is located in the Djerdap gorge from the Serbian side in East Serbia on river Danube.

youtube.com›watch?v=6vzOJBq3nPo

Near is the Golubac Fortress, medieval fortified town on the south side of the Danube River, 4 km downstream from the modern-day town of Golubac, Serbia.



Regards
Dubulumach

[FrancoItaly]

This is for hendra and other members that have requested help for the realization of my lrl and that maybe they do not want or time to read the older posts. They have made me a private request but I do not have time to answer everyone privately.

[kazımabı67]

lm358

Hi franco my porpose is 8mhz crystal osilator tape lrl.i want out put voltage range in the pin 1 ic1a (358?
thank you very much

hı,what are +,_ and other foot on lm358?

[abdou2014]

In the PCB

[abdou2014]

DISPLAY PCB

[HaFar2010]

HelloDear All.
I have a question about impedance, What is the minimum impedance of phenomenon to be able detecting?

[FrancoItaly]

We know very little about the phenomenon I think that the range of impedance is very broad.

[HaFar2010]

Thanks, can you guess a minimum and maximum?

[FrancoItaly]

Thanks, can you guess a minimum and maximum?

I have no idea.

[lupen]

Question

I have read all pages but at every page somethink added somethink removed....very confused...

Someone if ihas a complete part list guide photos in addition to build this project please upload here or please send me at lupengr29@gmail.com

I believe that this experiment promise good results

[FrancoItaly]

I have read all pages but at every page somethink added somethink removed....very confused...

Someone if ihas a complete part list guide photos in addition to build this project please upload here or please send me at lupengr29@gmail.com

I believe that this experiment promise good results

Here is all the material for the construction of my lrl, with the pcb of the sensor stage separated from the display stage. I recommend adding the antenna amplifier because it makes the calibration of the sensor stage less critical (as it requires less amplification). Unfortunately, the original pcb does not include the antenna amplifier that must be on a separate pcb or you can modify the original pcb. I repeat that the pcb of the sensor stage is better than it is double-sided, with the lower face connected to the ground. I also recommend making the 3 LED version and using the power stage that appears in the single LED version. I understand that it may seem a bit confused but it is a project that has changed over time. In addition to this version there is also that without quartz oscillator but with the IC CD4046, but I find it more complicated without being more sensitive.

[lupen]

Thank you very much Franco I will try it