Lrl from Italy

[Dubulumach]

Франко Версия подлиная

[Atama]

Hello Dubulumach, do you use all these extra capacitors? If so, what is the result?

[hakandurmaz]

THANK YOU VERY MUCH FOR YOUR ANSWER. I UNDERSTAND IT IS LIKE THE PICTURE. IS IT TRUE?

33nF capasitor yeri yanlış kontrol edin.

[TufaN]

33nF capasitor yeri yanlış kontrol edin.

TEŞEKK?RLER HASAN KARDEŞİM BU PCB Yİ YAPMIYORUM ZATEN KENDİM ?İZDİM KOMPLE SMD OLARAK ONU YAPACAĞIM MERAK ETTİM ANTEN BAĞLIYORLAR 2 3 TANE ONU SORDUM SADECE

[hakandurmaz]

TEŞEKK?RLER HASAN KARDEŞİM BU PCB Yİ YAPMIYORUM ZATEN KENDİM ?İZDİM KOMPLE SMD OLARAK ONU YAPACAĞIM MERAK ETTİM ANTEN BAĞLIYORLAR 2 3 TANE ONU SORDUM SADECE

2-3 antenli farklı sistemler var.

[TufaN]

2-3 antenli farklı sistemler var.

?ALIŞTIĞINDAN EMN OLDUĞUN DEVRE VARMI ?

[hakandurmaz]

?ALIŞTIĞINDAN EMN OLDUĞUN DEVRE VARMI ?

hdurmaz42@gmail.com

[Atama]

hdurmaz42@gmail.com

kardeş ?zelden bana da s?yler misin aylardır cebelleşiyorum ama daha tam ?alıştıramadım. yani hesapta ?alışıyor, elimi antene yaklaştırınca ?t?yor ama icraat yok, g?md?ğ?m g?m?ş? falan algılamıyor

[TufaN]

Hello Franco, this is my pcb layout by your pcb hand drawing, it's not double sided, how should i shield it? The small pcb is display stage, will it make some problems to be like this or should i remove it from there? If you notice some irregularities please tell me. I am using 12v battery but it is not regulated and the voltage is 12.47 and keeps going down as i use the lrl (i don't use it more than 12v), should i put a regulator or is it ok like this? Thank you.

TWO 220 NANOFARAD CAPACITORS ARE USED IN THIS PICTURE. DON'T THEY ORIGINALLY HAVE TO BE 22 NANOFARAD?

[hakandurmaz]

Franco

Duzenleme yaptım denemek isteyen.

[FrancoItaly]

I remind everyone that the only language allowed is English. To shield the sensor stage, you can put another PCB of the same size on the lower part, not engraved and connected to ground. The capacitors are 22 nF. The voltage must be 12V stabilized starting from 18V (2 X 9V batteries in series) and the power supply stage scheme is the one indicated in the LED display (version 1 LED). I remind you that even a small modification can affect the correct functioning.

[gs78]

Can we make adhesive foil for the bottom pcb

[FrancoItaly]

Can we make adhesive foil for the bottom pcb

Yes

[TufaN]

The latest version of 8MHz LRL system with Polygon pcb.

I am busy completing projects

Hello Mustafa, I am writing from Turkey. Do you have the files for this PCB? Can you give them?

[TufaN]

Hello Mr. FrancoItaly engineer. In this video, when I touch the antenna, the LED turns off and the TR5 emitter is 4.5 V. Is this LRL working normally?

https://www.youtube.com/shorts/aLyTPBUyFTY