Announcement

Collapse
No announcement yet.

Frequency discriminator and all-electronic receiver

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Probably have better chance if you post your request on one of Estaban's threads

    Comment


    • Thank you Mike

      Comment


      • I am hoping some day I can move this project out of the 1900's. I guess I need to start with myself.

        Comment


        • been about a year and a half since I posted here on this thread. Worked on many different ideas and mostly shelved all of them. So I'm back to nearly the first version because it gives a stronger signal and more stable and less hassle for me. Health and mental issues have taken their toll on me and finances are even worse. LOL I was hoping to have an investor but even that just disappeared into thin air. Never heard from the guy again. He's probably making more money than he needs right now. that's okay. Pretty much decided not to worry about any commercial venture. If it happens, it happens. I really got stressed out and burnt out over the whole thing. I was working on it earlier this year, tried out some ideas and decided too much other worries in my life to add any more. But some day when I get time and money i will go back and redo a couple of the ideas but i'm not going to force things. And I haven't even been out hunting with it since I can't remember when. ANd with my situation it's not going to be real soon. And the weather has been crazy around here. Cold with highs in the forty's and even thirty's some days with more snow predicted. Great! And my hunting partner has gone more mental than me. He went crazy over the political scene. Can't deal with that right now. So don't feel like going hunting alone. All a rough situation but someday I'll get it all together. I hope.

          I'm still trying to get new insights. Sometimes i get these bursts of Wile E. Coyote ideas. Had one last night. Watch out, Roadrunner!!! My brain is so slow I think glaciers move faster and are warmer. As I say, I can spend years at the school of hard knocks before I wave the white flag. But not yet.

          Comment


          • Here is a short video clip of the Contraption on some silver. I put the ropes down so you can better see the line to the target.

            Comment


            • Thanks Mike, very good work!!

              Geo

              Comment


              • Nice idea - those ropes line. One could use laser pointer too.
                Global capital is ruining your life?
                You have right to self-defence!

                Comment


                • Very good Test , Congratulation Mike , method may be works with Trasnmit Resonant Freq. for Silver X,x Khz , and Receiver Box in same Frequency .

                  Comment


                  • Thanks to all.

                    It doesn't alway lock-on to the target. The further the distance the less reliability and the longer it takes to lock-on.

                    I've messed with a laser pointer and it's not that easy. Something causes the signal to get disrupted and off line. At least when the laser is near the receiver antenna.

                    The receiver is wide band so it can be used for various frequencies. Same with the transmitter. It reaches a point where the signal weakens, but it works okay for most all frequencies.

                    The video was not easy to make and was a compromise just for the video sake. I can get the signal angle narrowed down quite a bit more-- so there is only three or four clicks when on the target.

                    Comment


                    • What I am trying to say is the transmitter can accept a fairly wide range of input frequencies. Like 100Hz to 25KHz.

                      Comment


                      • Ok Mike, Transmitter send from 100Hz to 25Khz Square or Sinuoidal wave in search mode continious , also Receiver is in Wide band from 100Hz to 25Khz . This is good Idea ,
                        but also You can Test with send up to 1 minute with High Power and Off Tx ,
                        after you can search backup Receive signal from buried (this test is for only buried).

                        Comment


                        • I don't have any large mass long-time buried to test that. I think I know what you are saying--toggle the transmitter and see if signal can be achieved passively. I don't know if it will work that way. If you recall the later version Gold Gun needed it's own transmitter. Same here. I know the inventor later designed a high power receiver AGR that did not require a transmitter--it used the power from a local AM radio station. That might work but we have only low power AM radio round here--5KW. I think you need 50KW.

                          Comment


                          • AGR stands for Advanced Geophysical Receiver. Accurate Locators (out of business since the owner died) sold them for like $10,000. They were for large mineral deposits/lodes and only had about 100 feet (30M) range. Somewhere I have some info on it. I'll look for it.

                            Comment


                            • I hope nobody gets the wrong idea here. The Contraption is not perfect by any means. What the video showed is true--no tricks or gimmicks. But the signal doesn't always lock-on to the target. I've been out with it only a few times in the field (city parks) and it wasn't any miracle. I keep working on it.

                              Comment


                              • It's pushing two years since I last posted on this thread. I've been suffering brain fog, still have it but back on the low-carb diet and it seems to be helping me think a little bit clearer. I made a "discovery" this morning--had the receiver set too sensitive. Something that simple had me so messed up picking up stray signals. This past year I was about to give up on the whole project, didn't even touch it for months. I don't have any markings on the dials so I just assumed it was okay---wrong!!!! It's below zero outside so I'll have to wait until late tomorrow maybe, but indoors it's working pretty good.

                                Found out some other stuff, but will have to experiment with it. Changed frequencies, too. Still might try to get the magnetometer going. But I'll wait until I am bored to death with the Winter weather. So I got my enthusiasm back!

                                Comment

                                Working...
                                X