k140ud13

[Geo]

Hi.
I want to find (if there is) the schematic of the IC--- k140ud13. Also i am interesting for an American similar ic. As you maybe have read at IGA-1 thread this IC is a MDM type ic.
Many workable lrls uses the MDM method to catch the phenomenon. So i want to "see" the shematic of this IC and maybe to design a known commercial lrl with this ic so to see if will have better results.


Regards

[WM6]

In Cyrillic:

К140УД13

http://kiloom.ru/microsxema/k140ud13.html

http://www.chipinfo.ru/dsheets/ic/140/ud13.html

You can try with this possible west replacement (seem no really direct replacement):

uA727M then AD8628, AD8230, LTC1250, LTC2053, etc. (Look for datasheets on "description", in which words "included" should be something as "zero-drift").


Inner design of К140УД13 you can find here:

http://studopedia.org/2-131501.html

Look at drawing Рис. 1.109

[Geo]

Thank you WM6.
I believe that uA727M etc are not compatible withUD13 because they have not input for demodulator etc....
All the other that you have post are fine

[Geo]

WM6, is it easy to find and the schematic of K140UD17?????
I want to compare it with OP07.

Regards

[WM6]

Hi Geo

According data from Russian sites replacement for К140УД17
should be OP07E, OP77

http://pblock.narod.ru/info/ou_w.html

http://www.chipinfo.ru/dsheets/ic/140/ud17.html

http://elektrotanya.com/files/forum/2011/11/Analogok_0.pdf

Not found inner structure schematic.

[Geo]

Thanks wm6.
All info gives the OP-07E for similar so no reason to looking further for schematic. This that surprise me is the low bandwith.

[enjoykin4]

QUESTION FOR MODERATOR qiaozhi OF THIS FORUM ??

WHY DID YOU ERASED MY LAST MESSAGE TO SLOVENIAN YETI(WILD MONKEY WM6GURUMONKEY WITHOUTH MY PERMISSION ??

I DON'T TOLERTATE SUCH NAZI BEHAVIOUR !! YOU ARE LIKE A ADOLF HITLER !!

UNDERSTAND SMARTY !!

[enjoykin4]

Thanks wm6.
All info gives the OP-07E for similar so no reason to looking further for schematic. This that surprise me is the low bandwith.

GEO HI !!

USE OP 277 or OP 377 from burrbrown insteaqd K140UD17 MODULATOR/DEMODULATOR !!

USE HIGHLY POLISHEY COPPER DISK FOR ANTENNA INPUT FRONTEND IGA-1 device.


PS: TRY ANY HIGHJ PRECISION LOW DRIF LOW OFFSET DIFFERENTIAL AMPLIFIER FOR 1 STAGE OF IGA-1 DEVICE. SEARCH ANALOG DEVICE SITE !! REGARDS !!

Regards Enjoykin4

[Geo]

Thank you Enjoykin4.
I found (ordered) UD13 and will try them first, if no results will try a different as you suggeste.
About UD7 what do you think for the LM741 at metal can???
Also do you know the project that adding to IGA-1 a narrowb software tunable filter as Vega??
Do you remember the distance between the 2 antenna disks???
Sorry for many questions but i collect info for next winter.....


Regards

ps... you can connect with me at gvrond@excite.com

[enjoykin4]

Thank you Enjoykin4.
I found (ordered) UD13 and will try them first, if no results will try a different as you suggeste.
About UD7 what do you think for the LM741 at metal can???
Also do you know the project that adding to IGA-1 a narrowb software tunable filter as Vega??
Do you remember the distance between the 2 antenna disks???
Sorry for many questions but i collect info for next winter.....


Regards

ps... you can connect with me at gvrond@excite.com

Hi Geo !!

All Russian OPs are in metal case so use only metal case analog.
I dont know about narrow band filters schematic. Try first analog schematic without filters and than you can design own nb filter stage. Or use filters from some Tessoro metal detectors with some modifications. Distance about 10 cm. This should be estimated experimenatly according to your design for maximum sensitivity !!

Best regards
enjoykin4