Pistol Detector - TOTeM (Complete Details)

[abdou2014]

did you detect the battery spark several meters away with or without the transmitter or stimulator ?

At first my Totem does not detect the spark, and when I change the comparator and the audio, I have succeeded !

[Qiaozhi]

did you detect the battery spark several meters away with or without the transmitter or stimulator ?

At first my Totem does not detect the spark, and when I change the comparator and the audio, I have succeeded !

Spark detection does not require the transmitter to be operational. You can detect it in passive mode.

[abdou2014]

Thank you !

[zixelll]

help

Hi my friend qiaozhi what's the best frequency for totem and what are the best changes to this machine and what is the loop making?

[Qiaozhi]

Hi my friend qiaozhi what's the best frequency for totem and what are the best changes to this machine and what is the loop making?

All details are in the attached PDF document in the first post of this thread.

[الوهم]

https://www.youtube.com/watch?v=7OSvwmJkp7M

[Jeg]

Heathkit sensitivity

Dear Qiaozhi
Do you think that Heathkit's sensitivity is comparable with the circuit receiver that you have made for the totem pd? I would like to build the heathkit with the omega coil system but by using your circuit. The only doubt i have is the fact that heathkit has a regenerative feedback and i am not sure if the opamp solution can reach heathkit's sensitivity. What is your opinion?


Thanks
Jeg

[Qiaozhi]

Dear Qiaozhi
Do you think that Heathkit's sensitivity is comparable with the circuit receiver that you have made for the totem pd? I would like to build the heathkit with the omega coil system but by using your circuit. The only doubt i have is the fact that heathkit has a regenerative feedback and i am not sure if the opamp solution can reach heathkit's sensitivity. What is your opinion?


Thanks
Jeg

The Heathkit GD348 detector is very old and not very sensitive, even with its 10" coil.

It is also important that you understand TOTeM is an experimental PD designed to investigate the claims of LRL proponents, and that there is no accepted scientific theory to back up any claims for this type of device. It's main purpose is to give you an opportunity to explore the pseudo-scientific world of LRLs, and make up your own mind on the matter.

[Jeg]

The Heathkit GD348 detector is very old and not very sensitive, even with its 10" coil.

It is also important that you understand TOTeM is an experimental PD designed to investigate the claims of LRL proponents, and that there is no accepted scientific theory to back up any claims for this type of device. It's main purpose is to give you an opportunity to explore the pseudo-scientific world of LRLs, and make up your own mind on the matter.

Thank you my friend! I am also a sceptical experimenter as i have built a ton of LRL's the last 10 years. But i always wanted to put a finger on Alonso's pd, and your circuit looks perfect for that. Simple and reliable.



Thanks
Jeg



ps. I am looking forward for the Arduino nano totem version.

[folharin]

this project is a complement to the alonso pd circuit, i think it could work in the old days, needs testing..someone post the results in the group!

[folharin]

this circuit used a resonance from a local radio station...from the old days

[Brahimolayt]

Hello, i made this circuit ,and i can get fm radio station vhf 96.7 Mhz by tuning the receiver coil capacitance and adding just the audio amp section. It is also sensetive to electromagnetic anomalies

[kostas87]

Hello, i made this circuit ,and i can get fm radio station vhf 96.7 Mhz by tuning the receiver coil capacitance and adding just the audio amp section. It is also sensetive to electromagnetic anomalies

hello Brahomolay !Very nice, what changes have you made to the pickup coil and audio stage?

[Brahimolayt]

hello Brahomolay !Very nice, what changes have you made to the pickup coil and audio stage?

Hi my friend. Sorry for not being here often.indeed I can catch that radio station by playing with the coil inductance and preamplifier frome radio .

[Mt724]

Hello Mr. Qiaozhi I hope you are well, I want to make one of your circuits, I only have this photo, thank you for giving me more details to make the circuit. Connecting the coils to the circuit, and a photo of the ready circuit, etc.) Thank you in advance