pistol dch

[Pahom]

Have you tried them? Do they work?

I already wrote that I ordered two, one was not working, too, the consumption of one was about 60mA and it was very hot. But one works very well.

[abdou2014]

You are wrong Dubulumach, do not give false hope, TDA7000 pin 13 cannot capture short or fast impulses, the TDA mixer is not made for that, in this case it is used as a stimulator that's all .

[abdou2014]

Even if you only use the mixer it doesn't work, it's still a stimulator, unless you change the input

[abdou2014]

there is in this forum a good mixer and good stimulator, we don't need TDA like stimulator !

[Dubulumach]

You are wrong Dubulumach, do not give false hope, TDA7000 pin 13 cannot capture short or fast impulses, the TDA mixer is not made for that, in this case it is used as a stimulator that's all .

Before learning me electronics first finish study some university!


TDA7000 is a FM radioreceiver not @stimulator@ as you said. Btw @stimulator@ as many here speak about it - is in fact Q-multiplier well known in electronics.


Conclusion is simple.

Befoer teach somebody - first teach yourself.

[abdou2014]

It's obvious, but in DCH it is a stimulant, even if I am not specialized in electronics because I am a doctor, but I understand better than you can imagine

[abdou2014]

Think what you want, I speak from experience because I have done these experiments in practice, I try to help, but I notice that you only know to copy the diagrams and photos of Esteban and Google searches and post

[Dubulumach]

Think what you want, I speak from experience because I have done these experiments in practice, I try to help, but I notice that you only know to copy the diagrams and photos of Esteban and Google searches and post

Hm hm hm.
What do you know about me, my knowlages and skills? 100500% NOTHING.

Dont make conclusions without facts. Got it!

BTW i'v showed diagrams and photos not for you but for the other memebers, to point their attention on some important things. So no one message was addressed to you and stop making yourselfs a fool.

[abdou2014]

FOOL: YOUR PARENTS DIDN'T EDUCATE YOU

[Dubulumach]

FOOL: YOUR PARENTS DIDN'T EDUCATE YOU

I think your intentional offend is enough for absolute BAN at this forum.

---------------------------------------------------------------------------------------
Tо: Admin and moderator -Тake draconic action against this ill-mannered member "abdou2014".

[Pahom]

there is in this forum a good mixer and good stimulator, we don't need TDA like stimulator !

And which one is needed ? If this one is bad?

[Geo]

Rοle of TDA is n't as stimulator..

[Dubulumach]

σνίφερ
Αυτό ψάχνει για μια βελόνα σε άχυρα-κυριολεκτικά!

[Geo]

...........

[Zicos]

hello everyone. I was playing again with the receiver circuit with the 741 and I couldn't help myself I took the screwdriver and turned the trimmer again and it was flashing again I tried it many times and it always flashes. Am I breaking a component??? I also checked the circuit and saw that I had connected pin 4 of the 741 to the output of the 1MΩ trimmer. Now I fixed it at -9 volts. It flashes and so on when I turn the trimmer. What does the trimmer adjust in the circuit??