Real signal generator for dowsing

[Mike(Mont)]

According to Meyl, the air between the coils is an "air capacitor".

All I can say is people who think there is only small amounts of energy transferred over very short distances must be trying to measure it the wrong way. It requires some kind of resonant device to gather the energy, otherwise no energy is transferred. It's there in the longitudinal waves that travel through the air along the earth.

http://amasci.com/tesla/tmistk.html

Look at figure 9

[Mike(Mont)]

Oops, did not describe this correctly. The free electrons in the wire (or the earth) are compressible and act like a longitudinal wave.

[kostas87]

Hi Andreas,
I agree with you, I think you will find better distance if you use a higher voltage at the antenna.
My thinking is an RF power amp maybe 10 watts can be used to guarantee the 10 watts is available to the antenna at all frequencies.
I can also see it would be good to raise the voltage using a transformer to deliver higher voltage to the antenna and ground.

When you first presented your flat top antenna, you said :
"This antenna invented before 1920. The flat-top antenna functions as a monopole antenna with capacitive load.
...Anyone who wants to build this, follow the instructions to obtain a generator that actually carries the signal into the earth".
This is how I recognize this design to be based on the multiple loaded flat top antenna that was used in the early Marconi broadcasting stations in 1919.
This design was actually adapted from Nikola Tesla's patents for sending power to the ground.
I see your modification of this antenna is even simpler than the Marconi design.

But now you are talking about making new modifications for a proper antenna, so I am thinking you will modify to stop if from acting as single-wire ground transmission which Tesla designed.
It sounds as if your are planning to change it to become an antenna to broadcast more than 5% of the power into the air as RF broadcast.
If you do this, then I expect the ground power transmission will diminish, as more power is broadcast into the air.
In the VLF and LF bands, a large amount of this RF power radiated from the antenna will still penetrate the ground after passing through the air.

But if my idea is mistaken, then maybe you will be making modifications to the antenna for better power transmission to the ground.
If this is what you are intending to do, then I can see some possible mods which may bring this design closer to the original design which Tesla made to allow good power transfer to the ground.
In Tesla's designs, he used a resonant transformer to increase the voltage that is sent to the transformer.
But if we are to use a DDS generator to produce many different frequencies for testing, then we will not be able to use a resonant transformer, because the transformer will be resonant only at one frequency.
So it appears that if this scheme is used, we can only use a step-up transformer, which will probably not be resonant.
Still, we can find better ground penetration with a higher voltage.

I wait to see if there are modifications made by you or other readers.
See below for a schematic diagram of the Marconi Flat top antenna and some links for further reading:

http://www.tuks.nl/wiki/index.php/Main/PrinciplesOfWirelessPower

http://amasci.com/tesla/tmistk.html

http://www.teslauniverse.com/nikola-tesla-patents-649,621-transmission-of-energy

http://www.teslauniverse.com/nikola-tesla-patents-645,576-transmission-of-energy

http://www.teslauniverse.com/nikola-tesla-patents-1,119,732-transmitting-electrical-energy

Note: These are not schematics for construction. They are only general diagrams to show basic concepts.

Very smart theory! it is practically believed that the transmission of signals by a single minute flash moment through a transformer has amplification and the creation of static fields over metals in the soil of a certain period of time;

[Geo]

Hey Kostas.... where are you???

[dragomir]

When we talk about frequency discrimination using generator and L rods, we first need to know that with L rods, electromagnetic waves can not be captured. People are good recipients of other types of energy, but not electromagnetic waves. If some of you are familiar with the experiments of Professor Turen, who is the founder of the scientific physical radiodetection, he will know that Turen has discovered another component of the wave. He says that each wave consists of a carrier wave, a wool and an information wave. A person with L rods is sensitive only to the information wave. Each electromagnetic wave is accompanied by an information wave. Information waves are subject to laws close to the properties of light. When the transformer is placed at the output of the frequency generator for reconciliation with the ground, its coil also emits the information field. It is enough to connect a suitable coil to the output of the frequency generator and the field will be emitted. Even if only the telescopic antenna is placed on the active end of the output of the frequency generator, the information field will still be emitted. Nuclear magnetic resonance can only be done in a Faraday cell. In the case of L rods and a frequency generator, nuclear information resonance is obtained. And for this, this resonance takes place outdoors in nature.

[Mike(Mont)]

My two cents cryptocurrency (just about worthless):

The ground has to be charged up. However, if the ground is conductive, there are leaks and it won't hold the pressure.

[kostas87]

When we talk about frequency discrimination using generator and L rods, we first need to know that with L rods, electromagnetic waves can not be captured. People are good recipients of other types of energy, but not electromagnetic waves. If some of you are familiar with the experiments of Professor Turen, who is the founder of the scientific physical radiodetection, he will know that Turen has discovered another component of the wave. He says that each wave consists of a carrier wave, a wool and an information wave. A person with L rods is sensitive only to the information wave. Each electromagnetic wave is accompanied by an information wave. Information waves are subject to laws close to the properties of light. When the transformer is placed at the output of the frequency generator for reconciliation with the ground, its coil also emits the information field. It is enough to connect a suitable coil to the output of the frequency generator and the field will be emitted. Even if only the telescopic antenna is placed on the active end of the output of the frequency generator, the information field will still be emitted. Nuclear magnetic resonance can only be done in a Faraday cell. In the case of L rods and a frequency generator, nuclear information resonance is obtained. And for this, this resonance takes place outdoors in nature.

Interesting! Explain more for the nuclear information.

[dragomir]

Mike, you do not have to excite the metal underground. Its field comes to the surface of the earth, thanks to the glow of the Earth's core. At the radiated waves of the Earth's core the waves of gold are modulated and rise above the earth's surface. There they are picked up on Earth's magnetic field and it takes them north.
What happens next? Solar radiation, according to Professor Turen, emits the waves of 86 chemical elements. But this is not radiation. The air is saturated with ultra-tiny particles, which are selectively attracted by the golden radiation and form oxides of gold on the surface of the earth.
What happens next? Solar radiation, according to Professor Turen, emits the waves of 86 chemical elements. But this is not radiation. The air is saturated with ultra-tiny particles, which are selectively attracted by the golden radiation and form oxides of gold on the surface of the earth.
The more golden field is transferred to the north, the more the vibration frequency changes. To the north, oxides appear that are combinations of chemical elements that have a frequency close to the frequency of gold, close but not the same.
Incorrect frequency generator frequency captures oxides in the north, which also decompose and release ions. And so all searchers capture fields north of the true treasure site - I am talking specifically about Europe.

[Mike(Mont)]

Well, the gold oxides might be the reason for all the false responses. Right now, going South sounds like a good idea.

[kostas87]

Hi Mike, how are you so sure? Soil does the phenomenon, we do not want to tear the soil but after the phenomenon, to help the atmosphere make it visible! Anyway, I had a meeting with my friend Geo, where we live in the same city and have great experience.
After much discussion and analysis, we could not find a clear solution and determine that this is some frequency or some other form of energy that could help to make the phenomenon more visible than it is. But I know very well that there is something that can help the phenomenon be more visible.

[dragomir]

The reason is the inaccurate frequency of the frequency generator. When the frequency is absolutely accurate, no oxides are captured in the north. You go straight to the treasure. These are my studies that show the following: Then there is a very strong resonance. No need for a high power generator - 1 watt can cover several kilometers in the air, but it must be visibility. The frequency of the generator is constant and is not influenced by climate change, temperature, humidity, pressure, magnetic storms, land fluctuations and operator biofield.

[Mike(Mont)]

Kostas, no one is forcing you to believe anything. This is just food for thought.

Dragomir, Christopher Hills (author of Supersensonics) wrote about searching for special plants/herbs by using the sunshine as a carrier wave. When he got a response, it meant he had crossed the line between the Sun and the herbs.

Sam "Lobo" Wolfe expanded on this theory and said the sunlight hits the target then continues/reflects at the same angle on past it. So basically if you are between the Sun and the target when you get a response your shadow is on the target or if you are past it you get a response on the reflected angle that comes back out of the ground. So I guess he covers all angles that way. LOL But he might have explained it improperly and like you say, the downstream response is really the oxides.

Thanks for the info.

[dragomir]

What I'm saying to you is not my hypothesis. This is my theory based on Touren's work and my research with technical means. And for the influence of the sun and work with the sun's rays was written by many French monk Padey.

[Mike(Mont)]

Abbe Mermet said there are gradients (or something like that) and the dowser can sense a mirror image at each line from E-W-N-S.

Bob Fitzgerald says the mirror image is to the south of the real target.

I heard somewhere about the target's field tilting towards the north which would make the target to the south. I believe the old timers were more sensitive. The modern day redneck dowsers are mostly watered down to nothing, ignorant, and greed motivated.

My own experience I've seen mirror images to the south of the real target. If you get a copy of the book "Supersensonics" there is a diagram of the magnetic fields--way more complicated than the simple flux lines of a magnet. Nodes/hot spots all over the place.

[dragomir]

I'm not talking about mirror images anywhere. I'm talking about what's happening with the vibrations coming from the buried metal in the ground. Mirror images are captured when working only with L rods and a witness. They appear to the north and to the south. They are hunted with L rods from a distance, and between them is the exact location between the northern mirror image and the southern mirror image.