Tweet
Originally posted by adand
View Post
-
hi!I have made one and i must to do some tests first to sell it...With this simple lrl i have find 4 times silver coins -
-
-
Frequence on air snd frequence under grounf
Dear friends
For the SAME OBJECT, is its frequency on air same at its frequency 30 cm under ground .
For ex. gold or bronze or copper...Comment
-
in the first photograph the silver detection area,in the second photograph my new lrl with the long range 1000 meter 433 mhz transmitter and receiver,in the third photograph a scan from my amateur magnetometer-gradiometer,in the cycle i found the silver coins,this point have the minimum signal from the magnetometer
Comment
-
third photograph scan
Dear sir
In the third photograph scan from your amateur magnetometer. What the brand name of the machine used .Comment
-
This is a magnetometer made in taxma1981:χαχαχα:Comment
-
Silver frequency in the NMR periodic table
Dear friends
As you noted before that the NMR frequency of gold is 1745.
Pls what the frequency of silver in the same tableComment
-
LRL taxma. Is detect mineral rocks.?
Dear Taxma1981 and friends.
Is LRL taxma detect the mineral rocks under some frequencies?
And with what range of frequency, i can solve this problem.
Best RegardsComment
-
Hi!what frequency do you use with your lrl?Comment
-
Mineral rock frequency
Hi , good morning
I use many frequencies , all under test.
Otherwise my friend use the electroscope machine as antenna with turned power OFF.
we used frequencies for gold 32-35 also 77-79 also 5400-6000.
Also 700-800 for cave.
Its problem to test 20000 frequencies.
I am interest im cave.
Gold.
Or atlest any buried real metal but not mineral rock because any metal in cave sure have value ,
Big value..
What you suggest as real frequencies for some metals and to isolate these rocks.?
Thank you in advance.Comment
-
hi!!!i don't look gold in caves and physical gold and i don't know a frequency for this ,for better results i use frequency bettwen 8.700-9.100 khz.If i am in a good area i can detect silver,copper and gold with this band,you can't detect only a one metal with a frequency
This is the foto from my lrl it is work with 9.046 khz and i have already found silver:ΡΕ
the data it is from my magnrtometer ,with my lrl i detect the silver and with my magnetometer the point
Comment
-
Hi taxma1981
Thank you for yr reply.
I use the device ELECTROSCOPE as antenna without power ON.
During my testing and contacts with colleagues, each device has its own frequency related to the way it is made, the form of the antenna etc.
It is therefore useless to mention frequency numbers.
My LRL indicate gold and silver with a frequency of about 79 and about 5200
Caved about 725.
ThanksComment
-
Do you have a foto from you lrl?Comment
Comment