from lrl to dowsing

[Sreekumar]

Gold stone frequency

[Sreekumar]

Finding minerals (stones)using 9046hz what is the solution do it?

[humhum]

Finding minerals (stones)using 9046hz what is the solution do it?

Finding of minerals not is from operation frequency , Try to use serial Ferrite with many tours
before signal Output , also can Try with use one 10k or 100k potansiometer connected of output to gnd , for elimination of small signals .

Operation Frequency is importand for find or Resonant of desired, preferred Metal .
, not for elimination of mineralisation

[Sreekumar]

Thank you brother

[Sreekumar]

Does the transmitter layout work and stick it to the antenna instead of the phone,thanks

This circuit working methods please

[humhum]

Hi Taxma , Hi friends
First at all , thank you for you quick assistance.

Otherwise, Whatever you found in Freq. 9046 ,
Can you friendly explain to us , how and why you select this 9046 Hz exactly and
Not 9050 for example ?
Some secrets are invisible.

This All using frequency is Subharmonic of main Resonant Frequency of different Metals , for example :
if main resonant frequency of Gold is xx.xxx,xxx Mhz , so it will be / 2 , some time /3 ,
10.Mhz /2= 5Mhz / 2 = 2.5 Mhz ......../2 ....Khz ..... and down to Hz .
When is in Khz or Hz station it will be mixed with Regional or with Earth long wave ,
so You will Receive Gold ions or Signal with set of this Wave , not only with Receiver ,
also when Transmit this resonant wave your Rod can find or moving to this Signal .
Many Years I have experiment with this All .
Only problem is elimination of minerals for find wanted Metal .

[taxma1981]

today i found a little treasure with a radio AM , you tune the radio near a station for example the station broadcasts 630 khz,settings the reception just above or below the station, connect a rotating antenna to the radio antenna and you are ready.

https://ibb.co/gzPsjRd

[humhum]

today i found a little treasure with a radio AM , you tune the radio near a station for example the station broadcasts 630 khz,settings the reception just above or below the station, connect a rotating antenna to the radio antenna and you are ready.

https://ibb.co/gzPsjRd

Very Good ,
Why Your Antenna is in two way Forward and Back position . Must be only in one Way , for know where is target way .

[taxma1981]

the rear antennas are always closed, only the front one opens

[humhum]

the rear antennas are always closed, only the front one opens

Ok , sens only alone Antenna , other two is closed .

[taxma1981]

this is a good radio for experiments, it can receive signal from 150 khz

https://ibb.co/SyC5LcK

[humhum]

this is a good radio for experiments, it can receive signal from 150 khz

https://ibb.co/SyC5LcK

Why You not use FM band instead AM , in AM band have very false signals .

[taxma1981]

I think with the AM it is better

[abdou2014]

today i found a little treasure with a radio AM , you tune the radio near a station for example the station broadcasts 630 khz,settings the reception just above or below the station, connect a rotating antenna to the radio antenna and you are ready.

https://ibb.co/gzPsjRd

you worked in the ferrite antenna band and you connected the telescopic antenna as dowsing

what are you following? the sound of the radio or the orientation of the telescopic antenna ???

[taxma1981]

Both, but more the orientation of the antenna....I do not know how it is work but it really works