Tuned dowsing rods

[Geo]

Yes, and on the other end of the scale someone who is a poor dowser even a good rod will not help much. My firm belief is people tend to psyche themselves out and think too much. I say pick a spot out in front of you a ways and look at it and don't think about the dowsing. It is essential to keep the conscious mind out of the way.

Like Hills says, a good carpenter can use most tools and get them to work but he cannot drill a one inch hole with a two inch bit.

Unless you're pretending not to see the hole bigger. It is a matter of psychology !!

[Pahom]

This is an old site, not sure if it is still active.

http://www.precisiondowsing.com/index.htm

This site is not available. Is it possible to post information about frames here?

[Mike(Mont)]

I printed some of the info. I will look for it.

[Pahom]

I printed some of the info. I will look for it.

Thanks Mike!

[Dubulumach]

This site is not available. Is it possible to post information about frames here?

https://web.archive.org/web/20160329....com/photo.htm

[Pahom]

https://web.archive.org/web/20160329....com/photo.htm

Thanks, not exactly what I expected to see. Probably the difficulty of translation. Do you know the device of the electronic frame handle itself?

[Mike(Mont)]

Sorry I looked for those papers but could not find them. What I do remember is the rods were wrapped with thin magnet wire. One end of the wire is conneted to the rod. If you use technique to find the frequency that Tim Williams I suspect you could use the same wire length as the distance you walk from the test target.

[Pahom]

Sorry I looked for those papers but could not find them. What I do remember is the rods were wrapped with thin magnet wire. One end of the wire is conneted to the rod. If you use technique to find the frequency that Tim Williams I suspect you could use the same wire length as the distance you walk from the test target.

It doesn't matter, I understand that you have a wagon and a small cart in this topic of knowledge. And for various reasons, you can't put everything out here or tell me. As one clever inventor said . There is always a counterweight! It's like day and night. But do not forget that there is a transition between them, and this is either dawn or dusk. And few people study what happens during this period of time. That's a pun.

[Mike(Mont)]

https://web.archive.org/web/20160329....com/photo.htm

Yes, this is it.