Dowsing Rod for 2012

[Geo]

If we wanted a fixed frequency with a fixed duty cycle then only one 555 as astable was ok.
But i had problem at range from 3 to 70 Hz with fixed duty cycle. A very cheap IC was the solution.

Regards

[kostas87]

Hello everyone ... Merry Christmas ..! hi geo!
who worked on specific lrl a cave, you should pass directly above to react rod, with the appropriate settings for this!
GREETINGS ..

[Geo]

Hello everyone ... Merry Christmas ..! hi geo!
who worked on specific lrl a cave, you should pass directly above to react rod, with the appropriate settings for this!
GREETINGS ..

Hi Kosta.
Χρονια πολλα.
You tried this LRL. It is not for everyone, they must know about dowsing so to work with it.

Regards

[jack]

hi geo
Please reply to post number26
waiting for your answer
with respect

[Fred]

If we wanted a fixed frequency with a fixed duty cycle then only one 555 as astable was ok.
But i had problem at range from 3 to 70 Hz with fixed duty cycle. A very cheap IC was the solution.

Regards

Of course, but this is just an idea : You just need to install a pot in place of the 784k resistor, and you have a variable frequency. Then another pot in place of the 6.k8 resistor, and you have variable duty cycle (pulse) length. And the 555 is able to drain or source 300ma .
And voilá ! two pots , 2 leds on the 555 output , one for pulse length, and one for off state, just what you need to make it look good, and with enough controls to make it with many possible combinations and discrimination to olives .

Best regards Geo

[Geo]

Of course, but this is just an idea : You just need to install a pot in place of the 784k resistor, and you have a variable frequency. Then another pot in place of the 6.k8 resistor, and you have variable duty cycle (pulse) length. And the 555 is able to drain or source 300ma .
And voilá ! two pots , 2 leds on the 555 output , one for pulse length, and one for off state, just what you need to make it look good, and with enough controls to make it with many possible combinations and discrimination to olives .

Best regards Geo

Yesssss

Regards

[Geo]

tank you very much dear geo
Please answer my other questions about this device
1.please give a list and description of parts and machine work?
2.To what depth and distance can detect metals?
3.When it detects that the metal reacts?
4.I also recognize that new metal?Or is the only metals that traditionally defines the soil?
tank you
best wish for you in new year
jack

Hi Jack.
This is a LRod. You must know dowsing so to work with this. What this mean, that if you are a good dowser then you can detect either fresh and buried metals. Depth is bigger than what you can dig. Detecting distance.... i don't know but i believe to be more than 30m. If you are not a dowser then don't construct it, you need time to learn it

Regards

[Geo]

Here a schema of the electronic rod.

[jack]

When the LED light in this device?

The brass has a connection with you?

Sense how the metal reacts when the device is detected?

[Geo]

another schema....

[Geo]

When the LED light in this device?

The brass has a connection with you?

Sense how the metal reacts when the device is detected?

The brass base and stainless shaft, connected to the antenna.
You can put the led at every place you like!!!
When you detect a metal then the rod turns....
But i will tell again, if you don't know how a Lrod works, then stop the project.

Regards

[jack]

Thank you, Geo
After the brass rod through brass handle is in contact with the operator?same lrls
The schematic is attached to a brass rod bearing and the bearing to handle bronze.When I go step by step, because all Elements (rice sticks - Bearings - The Bronze) The telescopic antenna is connected to each other and are connected to the operator.
Is that true?

[Geo]

Thank you, Geo
After the brass rod through brass handle is in contact with the operator?same lrls

Yes.

[jack]

image of my Lrod

[Geo]

Jack, very good, congratulations.
I want to see the side to the handle and the bearing

Regards