Dowsing Rod for 2012

[indiana jones]

Here's my latest project for a friend . A telephone generator.
Can work signal boosted by the amplifier, or simply as dowsing.

The amplified signal comes in a transformer and comes in antenna numbers 2 and 3.
Simple signal go to antenna 1.

3 antennas can move left or right and give us sound.
When found target.

[teknoloji]

Some basic principles of dowsing
(This works for dowsing with a stick, or with electronic MFD dowsing):

1. Dowsing works.
Anybody can dowse.
Simply take dowsing rods in your hands and walk around and watch for when the rods cross together or do not cross together.
Or watch for when the rod points to various different directions.
Then you have accomplished dowsing.

2. Dowsing is successful for finding buried treasures only for some people.
The people who are successful at dowsing do not tell lies.
They really are successful.

3. A successful dowser will find success only when nobody else is watching them, or when other successful dowsers are watching.
If a person who is not successful with dowsing is watching, then the dowsing ability will stop working for the successful dowsers.

4. A successful dowser will not be successful if a person is watching who does not believe they are successful.
If you set up a test for them to find which of the 10 plates you hide the gold or silver coin under, they will not find the correct plate better than guessing.
This is part of #3 principle where they will lose their dowsing power when a person who is not successful with dowsing is watching.

5. A successful dowser will always pass a dowsing test, maybe 100% success if nobody else is watching.

So what to say?
Dowsing works.
Really.


Best wishes,
J_P

I completely agree with you.
belong on this dimension with the relevant people to recognize him.

Regards

[apogonos]

Hi.
I will show a new dowsing rod.
This uses a simple signal generator with variable frequency from 3.5 to 70 Hz.
With this you can locate caves, gold, copper etc.
The schematic is very simple (only 2 IC's and one transistor) and you can construct it on the pcb that i will attach here or at a general purpose pcb.
continued...

Geo happy new year to you,
very nice rod, it would not have a Frequency Counter on the rod?

[Geo]

Geo happy new year to you,
very nice rod, it would not have a Frequency Counter on the rod?

Hi Takis
Happy New Year, kalh xronia poy leme
If you see carefully the box, you will see 2 small bronze pins (from upper side). These pins are for frequency measuring


Regards

[jack]

hi dear geo
Can the 4017 output of an amplifier more powerful than the metals used to Sense?
Can you design a circuit that will alarm when the metal was Sense?

[Geo]

Hi Jack.
I can't understand your first question

[jack]

Hi Jack.
I can't understand your first question

Is it possible that the output IC for Better Sense of metals was further strengthened?(Using a more powerful signal booster?)
Can you design a circuit that will alarm when the metal was Sense?

[apogonos]

Hi.
I will show a new dowsing rod.
This uses a simple signal generator with variable frequency from 3.5 to 70 Hz.
With this you can locate caves, gold, copper etc.
The schematic is very simple (only 2 IC's and one transistor) and you can construct it on the pcb that i will attach here or at a general purpose pcb.
continued...

Hi Takis
Happy New Year, kalh xronia poy leme
If you see carefully the box, you will see 2 small bronze pins (from upper side). These pins are for frequency measuring


Regards

I think I put a Frequency Counter, from ebay : http://www.ebay.com/itm/9999Hz-LED-D...item35af3f9a6d

[Geo]

About your first question.... No reason for more power. When you will "learn" it you will understand me.
About second question.... i work on it with good results for begining, but i will not give it out.

Regards

[Geo]

I think I put a Frequency Counter, from ebay : http://www.ebay.com/itm/9999Hz-LED-D...item35af3f9a6d

If you construct it then you can put a counter at 555 output.
I don't need it because i marked the potentiometer knob

[apogonos]

σωστό

[jack]

About your first question.... No reason for more power. When you will "learn" it you will understand me.
About second question.... i work on it with good results for begining, but i will not give it out.

Regards

Geo's
I did not get the answer to Question 2

[goldfinder]

frequency drift with 555

If you construct it then you can put a counter at 555 output.
I don't need it because i marked the potentiometer knob

If you are relying on the 555 to stay on frequency then you are operating without exact frequencies.

The 555 use capacitors and a resitor to control the frequency. The capacitors change values slightly in different temperatures which results in frequency drift. You need to periodically check the frequency as the tuning will drift all over for the original setting. This is especially true in warmer weather. So if your electronic dowsing is dependent on an accurate stable frequency 555s are NOT the answer.

I have done hundreds of tests in the field and quit using 555s for and kind of stable frequency generator. I use a PIC microcontroller to generate frequencies and they are extremely stable.
Goldfinder

[Geo]

If you are relying on the 555 to stay on frequency then you are operating without exact frequencies.

The 555 use capacitors and a resitor to control the frequency. The capacitors change values slightly in different temperatures which results in frequency drift. You need to periodically check the frequency as the tuning will drift all over for the original setting. This is especially true in warmer weather. So if your electronic dowsing is dependent on an accurate stable frequency 555s are NOT the answer.

I have done hundreds of tests in the field and quit using 555s for and kind of stable frequency generator. I use a PIC microcontroller to generate frequencies and they are extremely stable.
Goldfinder

This is the reason that i have Test Points at the 555 output

[Geo]

Geo's
I did not get the answer to Question 2

Read #114