please ansower

[ma330]

hi to all'
I have some questions about lrl.s
1 - you must have contact with hands or bars must be insulated?
2-connect the oscillator to find the metal rod can be effective?
3- Do not use as a probe, two probes have power?
4 - How to find the generator helps metals?
5 - What is the best waveform generator to build?
6-Is the frequency of different metals?
7-What is the best power for the generator?
8-Crossing frequency of the transformer in the output waveform does not change?
9-And is located in the following four white capsules. What does it do them?

[ma330]

please help me

[Qiaozhi]

hi to all'
I have some questions about lrl.s

1 - you must have contact with hands or bars must be insulated?
Doesn't matter. You'll get the same result whatever you do.

2-connect the oscillator to find the metal rod can be effective?
You could save a lot of money, wasted on batteries, by not switching it on.
It will work the same whether connected or not.

3- Do not use as a probe, two probes have power?
Try all the combinations. I bet the results are exactly the same.

4 - How to find the generator helps metals?
I don't understand the question.

5 - What is the best waveform generator to build?
It really makes no difference what frequency or waveform you use. In fact, you could save a lot of design effort by simply soldering some components from your scrap box together in a random fashion. That's what certain LRL manufacturers do on a daily basis.

6-Is the frequency of different metals?
If your asking which frequencies will resonant with different metals when used with the MFD device - the answer is "none of them".

7-What is the best power for the generator?
Probably zero. In other words, when it is switched off. That way you are only wasting time and not money.

8-Crossing frequency of the transformer in the output waveform does not change?
I've no idea what you're asking here.

9-And is located in the following four white capsules. What does it do them?
The capsules are similar to "witness chambers", and are supposed to contain a sample of the type of target you're searching for. Using some twisted logic, and no scientific basis whatsoever, the idea is that these samples will somehow resonate with the target. Go figure.

Answers in red above.

[Dell Winders]

ma30, you can ignore everything this guy says about MFD. (no name mentioned)

The inaccuracy of his replies proves he has no field experience and knows nothing about the subject of MFD, or LRL he pretends to have expertise in.

Of course, he does have the power to control this forum and delete anything, by anyone, he doesn't want posted on this forum.

Good luck in your quest for truthful answers. Dell

[ma330]

I could not get my questions answered
wm6 ..j-p and other freinds please answer me correctly
i need to ths informations

[Qiaozhi]

ma30, you can ignore everything this guy says about MFD. (no name mentioned)

Since a well known manufacturer of MFDs (no name mentioned) was either unable or unwilling to answer his questions, I felt duty bound to reply with some real facts. At least it will spare him the agony of reading a collection of pseudo-scientific claptrap.

Sorry if the truth hurts.

[WM6]

I could not get my questions answered
wm6 ..j-p and other freinds please answer me correctly
i need to ths informations

Dear ma330

Qiaozhi is right.

You can waste your whole life on those false MFD theory only, without any results.

I cannot help you much this way.

Or with other word: I cannot calculate inductance of your body-dowsing-antenna and have no idea how to tune it on gold.

[Geo]

Hahahahaha......
You must say that you don't know.......
All MFD have some problems but they work.....
I found a lot of objects with them.

Regards

[WM6]

All MFD have some problems but they work.....
I found a lot of objects with them.

Yes Geo, and despite that it works, you discard your MFD and now are still looking for something that would really work? How we can explain this phenomenon?

[Dell Winders]

ma330, I'm very sorry, but very few people with any field experience can post on this forum without being drowned in the nonsensical rhetoric spewed by the powers that be. If you want straight answers without the hassles, you might want to try an unbiased forum. Dell

http://www.treasureworks.com

[Dave J.]

Ma330, Dell is right, you should go check out the Treasureworks LRL forum. Dell and I disagree on some stuff but this we agree on.

You will discover there the same thing that you discovered here: that the purveyors of LRL's cannot give you any straight answers regarding the technology. It is the people they usually call "skeptics" that provide a straight answer, even though it may not be the answer you want.

There are frauds in the world. LRL's are an example of such. If you want to commit the fraud yourself, you can get a good education right here from both the purveyors of same and the "skeptics" on how to commit that fraud. If you want to avoid becoming the victim of same, right here you can "read the advertisement" and see that the "skeptics" and the purveyors of LRL's are telling you the same thing about the fraudulent nature of the apparatus, just from different perspectives.

One way to better understand what this forum is, is to go check out the other ones. If in the end you decide to stick with the Treasureworks forum, it'll likely be because you got what you wanted there, not what you needed.

--Dave J.

[humhum]

m.f.d.

hi to all'
I have some questions about lrl.s
1 - you must have contact with hands or bars must be insulated?
2-connect the oscillator to find the metal rod can be effective?
3- Do not use as a probe, two probes have power?
4 - How to find the generator helps metals?
5 - What is the best waveform generator to build?
6-Is the frequency of different metals?
7-What is the best power for the generator?
8-Crossing frequency of the transformer in the output waveform does not change?
9-And is located in the following four white capsules. What does it do them?

Dear ma330, Geo and Dell Winders is Right in this thema also and Dave J. , because I try test with my two probe Moleculer Freq. Discrimination and it works perfect , found gold bangle from 180 meter with special Gen freq. for gold.

Result is MFD works only with correct freq. and power gen.

Regards.

[J_Player]

I could not get my questions answered
wm6 ..j-p and other freinds please answer me correctly
i need to ths informations

Hi ma330,
You have already built the MFD correctly and you have used it in the correct manner.
Your experiments have already answered your questions.
The answers can be found here: http://www.longrangelocators.com/for...670#post142670

You can see that your MFD is really working to locate the treasure, but it is difficult to recover the treasure that you found.

Best wishes,
J_P

[aft_72005]

Dear ma330, Geo and Dell Winders is Right in this thema also and Dave J. , because I try test with my two probe Moleculer Freq. Discrimination and it works perfect , found gold bangle from 180 meter with special Gen freq. for gold.

Result is MFD works only with correct freq. and power gen.

Regards.

Hi humhum
Please more explain , how you can find correct frequency ??

[Geo]

Yes Geo, and despite that it works, you discard your MFD and now are still looking for something that would really work? How we can explain this phenomenon?

I wrote it many times.
My problem with MFD is that at the same frequency with gold i locate and old rust iron