Thanks for the info Sedan, it's what I'm heading toward, and even though a white noise Generator hits all the Frequencies I need, it certainly doesn't Broadcast far enough. I like the Amplifier idea, because i need my signal to go as far as possible. I'm still in the process of figuring exactly what causes natures Element Ressonation. Even though a Machine might not be capable of duplicating it, a correct Real time graph is better than nothing. I'm working on Geomagnetic Pulsations, and waiting for some replies. It might be indicated in Bz., when above 5nt, but i still have some tests to do. I've been wrong, and posted wrong in the past. But a strong signal Generator will be in my future. But I need more Elements, because I also Dowse Meteorites, and Diamonds, not just Gold and Silver. Thanks again...
Announcement
Collapse
No announcement yet.
MFD or what
Collapse
X
-
The reason I'm looking for a Broad Band VLF Generator is because I use Elements to find Elements. I had a LRL that required you to set a specific Frequency for the Element desired. The Led reading on the device had to be precise, for it to correctly signal. It was obvious by watching the Led and by Dowsing, the signal would drift. Even if it only drifted a half setting, 100% discrimination could not be confirmed. When natures power is on, all Elements are Ressonated at the same time, and all same Elements connect their invisible Dowsable line. By me placing my 100% pure Elements on the ground, when power is on, I can positivly be sure that any connection line to my Element is 100% discriminated or pure. It makes it easier to find Meteorites, because you need multiple Element composition in the line, to determine if your signaling an Earth rock or Meteorite. If their's such a Signal Generator that Generates all Element Frequencies to a great distance, then I can use my Elements to connect to distant same ones. So it's not only easier, and quicker, but extreamly faster. The Omni-Range master i no longer have, because the board fried in it, was designed to send and receive a Specific Element signal 64 square miles, but in reality it only needed to Generate the Element signal, once Elements are Ressonated they connect themselves with the Dowsable line. The Machine was only turning itself into the Element set at, and ressonating distant same, connection occurs automatically.
Comment
-
Hi jax, I'm not sure what you do know, i assumed everybody knew about LRL Dowsing devices. Not to be believed, they don't work, no Manufacturer can stand up, and prove they work. Figment of a Dowsers imagination. Plus many more negative things said. I'm just a Master Dowser i call myself, not someone trying to prove anything. Unless you show up at my doorstep, then I'll teach what I know.
Comment
-
Originally posted by jax View PostIt seems that I have stumbled on an established form of dowsing that actually uses machines and electricity. I'm intrigued, and would be greatly appreciative if anyone wanted to explain more to me about this.
See chapters 13 and 14.
Comment
-
Gravitational Frequencies
Dowser
Your case of using a signal generator that blasts out a plethora of freqs with enough bandwidth is intriguing. I have built single signal generators with special antennas that generate what I call gravitational signals. Gravitational signals are pure longitudinal waves with no magnetic or electric components. This can be accomplished using bifilar coils which will cancel the two em components and create what I call a stress wave.
This is not standard physics but well known by many of us doing research in alternative physics. I have also derived the gravitational frequencies for all the elements. This is proprietary. Interestingly, these grav freqs do correlate with many of the elements that dowsers claim.
If you could reduce the frequencies or list of elements that you are interested in to a smaller amount than the entire periodic table it would be a simple matter of programming a micro controller, like a PIC, to rapidly scan through all these freqs at a high rate so to your nervous system would basically "see" all the freqs at once. A manageable number like 10 or less would be easily done.
Goldfinder
Comment
-
Goldfinder thanks for posting. I looked on E-Bay and was amazed at all the different Signal and Frequency Generator's and devices for sale. Most didn't have enough specs for me too understand where I would even start to build one myself, and for practical purposes it would have to be Dc. I know that the LRL I used to have had a range of 115Hz to 24.36 KHz, and i don't need all Elements Ressonated, just the ones i frequently use. I'm pretty sure Elements are VLF and Geomagnetic pulses are VLF, but which low Frequencies are the ones I need have to be figured out with my Elements, an accurate digital Signal or Frequency reciever, and me Dowsing. I'm sure all Element Frequencies are figured out, and there must be a list somewhere, that everybody agrees on, i haven't found it yet. I do know the Elements I use and need for what I'm trying to do. Gold, Platinum, Silver, Copper, Iron, Iridium, Carbon, Ytterium, Tellerian, Nickel, and Cobalt. Those are the main one's I would use. Even though there is other many other Elements in Meteorites, and other prescious metals, these are all that's i need. How close are they in Frequency, i wouldn't know. If a machine can be built like that it would serve my purpose, and i could Dowse with 100% discrimination all the time. Let me know if you can build one, and how much. Thanks
Comment
-
With all the different Signal or Frequency Generator ideas, most trying to accomplish the same thing, sending a specific frequency through the ground, or the air, and sending it a long distance, i don't see anything on how calibration of the devices is obtained. How are the specific Frequency's determined, and who determines them? If one Frequency Generator is set at 5KHz, will any Signal reciever read the same exact Frequency? How are they calibrated from zero? Is there one pure Element their all calibrated too? If I had a device made that only sent out ten specific Frequencies, in a rapid continuous Broadcast, just repeating the same Frequencies over and over, what determined the Gold Frequency to Ressonate Gold, Silver to Silver, ect ect ect. Where can I find information about Elemental Specific Frequency Ressonation?
Comment
-
PIC multi signal generator
I would have to make a circuit board with a 20 MHZ clock driving a PIC uC. Since the PIC takes average 4 clock cycles ( or 5 MHZ cycle time) per instruction the PIC program would have 1/5 microsecond accuracy per frequency per element plus or minus a 1/5 if microsecond. Since you don't know what kind of accuracy you need it may be a cut and try affair. Nature is by nature (ha) a little sloppy, i.e. there is some variability in resonance. The old Gaussian curve thing so a cycling through the 12 frequencies may just work as an application to your basic idea.Originally posted by Dowser View PostGoldfinder thanks for posting. I looked on E-Bay and was amazed at all the different Signal and Frequency Generator's and devices for sale. Most didn't have enough specs for me too understand where I would even start to build one myself, and for practical purposes it would have to be Dc. I know that the LRL I used to have had a range of 115Hz to 24.36 KHz, and i don't need all Elements Ressonated, just the ones i frequently use. I'm pretty sure Elements are VLF and Geomagnetic pulses are VLF, but which low Frequencies are the ones I need have to be figured out with my Elements, an accurate digital Signal or Frequency reciever, and me Dowsing. I'm sure all Element Frequencies are figured out, and there must be a list somewhere, that everybody agrees on, i haven't found it yet. I do know the Elements I use and need for what I'm trying to do. Gold, Platinum, Silver, Copper, Iron, Iridium, Carbon, Ytterium, Tellerian, Nickel, and Cobalt. Those are the main one's I would use. Even though there is other many other Elements in Meteorites, and other precious metals, these are all that's i need. How close are they in Frequency, i wouldn't know. If a machine can be built like that it would serve my purpose, and i could Dowse with 100% discrimination all the time. Let me know if you can build one, and how much. Thanks
As I mentioned I have derived a table of all the frequencies of the elements based on mass resonance of each atom. Gold is close to 5 Khz etc. and many of the other dowsed element frequencies are also close to the derived and I have verified some of these in the field although I don't pretend to be some kind of expert dowser.
If you are really serious about this send me a personal message.
Goldfinder
Comment
-
I must advise you of the magazine.Originally posted by Dowser View PostIn order for me to Dowse Elements without a Machine, i need power to be on. I haven't yet figured out what that power is, but I do know it's rarely on. When it is on, I'm assuming it's Frequencies, ressonating all Elements atoms. Those Frequencies/Power when on cover the whole spectrum, if that's the right term, and Ressonate ALL Elements atoms, at the same time. It doesn't discriminate. All Elements subjected to this power ressonate at their own Specific Frequency, and create Dowsable connection lines, between same Elements, this I know.
What i'd like to know is what is the cheapest, strongest, Signal Generator available ? One that doesn't discriminate, and one that would cover all Frequencies, just like nature does.
This used to work before it fried, but it discriminated.
115Hz to 24.36KHz variable
Max amptitude 1.38 volts peak to peak
Square wave with fixed duty cycle of about 40%
Without having much of a clue as to what that means, is it necessary?
Basically all I need is a cheap strong signal generator, that can duplicate nature's power of on. Any ideas?Attached FilesNo matter how the speed of light is high , Darkness is one step ahead .
Comment
-
Chock full of self-delusion, with a liberal use of selective memory. You only have to read the section entitled "COMPARING THE RESULTS WITH GEOPHYSICS AND HISTORICAL DATA" to see this in action. The author concludes "This has been the first occasion where I have been able to apply my dowsing under genuinely blind conditions and then have at least some of my findings subsequently confirmed by geophysical scans."Originally posted by reza vir View PostI must advise you of the magazine.
Notice the words "at least some of my findings subsequently confirmed", which could just as easily be interpreted as "the majority of my findings were unconfirmed". In other words, a total failure, except for a couple of lucky guesses that were most likely prompted by visual clues.
Have you actually read the real truth about dowsing? -> Info
Comment
-
Don't need to read what others think about Dowsing, I've figured it out, Mastered it, succesfully tought, and recovered lost, hidden, or never seen objects. But what's best is, I got to be soo good at it, I figured out how to design the only working, testable, proveable LRL Dowsing Machine in the world. No, it's not on the market yet. But it'll be available before 2014. Get ready Dowsers, this Machine is awesome.
Comment

Comment