My new KING LRL V 4.1

[Nicolas]

Nicolas - You are completely misunderstanding the comments made by Goldmaxx and Nelson. No-one here is insulting Arabs or anyone else for that matter. Please do not post abusive comments in the forum. The previous abuse you posted has been removed.

Unlike the Geotech forums, the discussion here can sometimes get heated. You need to accept that this comes with the LRL territory. However, this does not include the F word. Please read the forum rules -> Basic Rules of the Forums
Some abusive words get automatically filtered by the software, and this is why you sometimes see *****.

Goldmaxx has asked you to remove the photo of his TOTeM PD from your website, and I think this is a reasonable request.

Thank you dear Qiaozh

And completely clear and you can see that I already deleted! so I attached a picture after this removes

why I still see it there's the offensive comments?

Ok sorry I have already deleted your photos are quiet now

The problem is over for everyone.

Again sorry

Again sorry

Again sorry
Regards
Nicolas

[Nicolas]

Nicolas,

I'm not "against NMR," I'm against frauds who claim their bogus LRL uses NMR when it does not. You know as well as I do that there ain't no NMR going on with your little toy. That makes it a fraud.

Go over to the Geotech Geophysics forum and discuss your "NMR" methods with them. See what people who know what the heck they are doing have to say about it.

- Carl

Hi dear Carl
I understand you. And I am a member in the Geotech forum
And I know what we said all there.
but each to his opinion
you considered me fraudster by either against the other.
and the buyer in my country and the demand for this jouetset every day
not matter if you tell me. and also the people are not stupid in my country.
importance is that to buy this toy and satisfied 'cause he found his need with the toy itself.

and thank you for your advice. I respect you and the ideas you wear

I too am an expert in my field and I give my advice and prevention for a certain number of detectors.

look this my dear you can understand who me???

https://www.youtube.com/watch?NR=1&v=iYdO5S52nUo&feature=endscreen

https://www.youtube.com/watch?v=0dAfsVmVp_I

and this

https://www.youtube.com/watch?v=Dsly5FlojWY

but I m not fraudster my colleagues.

Cordially

Nicolas

[Qiaozhi]

Thank you dear Qiaozh

And completely clear and you can see that I already deleted! so I attached a picture after this removes

why I still see it there's the offensive comments?

Ok sorry I have already deleted your photos are quiet now

The problem is over for everyone.

Again sorry

Again sorry

Again sorry
Regards
Nicolas

Thanks. for removing the photo from your website.
Now let's all move on.

Nicolas - in your first youtube video, what CNC machine are you using?

[Goldmaxx]

Nicolas - You are completely misunderstanding the comments made by Goldmaxx and Nelson. No-one here is insulting Arabs or anyone else for that matter. Please do not post abusive comments in the forum. The previous abuse you posted has been removed.

Unlike the Geotech forums, the discussion here can sometimes get heated. You need to accept that this comes with the LRL territory. However, this does not include the F word. Please read the forum rules -> Basic Rules of the Forums
Some abusive words get automatically filtered by the software, and this is why you sometimes see *****.

Goldmaxx has asked you to remove the photo of his TOTeM PD from your website, and I think this is a reasonable request.

Yes Qiaozhi, that very exactly what I mean.
Thank you for your post

[Goldmaxx]

Thank you dear Qiaozh

And completely clear and you can see that I already deleted! so I attached a picture after this removes

why I still see it there's the offensive comments?

Ok sorry I have already deleted your photos are quiet now

The problem is over for everyone.

Again sorry

Again sorry

Again sorry
Regards
Nicolas

Hello Nicolas

Okay, I've seen that you have the pictures deleted from your side.
This is all what I wanted and everything else does not belong here.

Thank you

[nelson]

THANKS QIAOZHI
THAT´S EXACTLY WHAT I M MEANING

Nicolas - You are completely misunderstanding the comments made by Goldmaxx and Nelson. No-one here is insulting Arabs or anyone else for that matter. Please do not post abusive comments in the forum. The previous abuse you posted has been removed.

Unlike the Geotech forums, the discussion here can sometimes get heated. You need to accept that this comes with the LRL territory. However, this does not include the F word. Please read the forum rules -> Basic Rules of the Forums
Some abusive words get automatically filtered by the software, and this is why you sometimes see *****.

Goldmaxx has asked you to remove the photo of his TOTeM PD from your website, and I think this is a reasonable request.

[Nicolas]

Hello Nicolas

Okay, I've seen that you have the pictures deleted from your side.
This is all what I wanted and everything else does not belong here.

Thank you

Hi dear Goldmaxx


I'm not intentionally so, but just put that because we intend to manufacture and sell it to anyone who wants it
We make customized
And it is not intended to offend you or anyone else


You are welcome

Cordially my friends
Nicolas

[Nicolas]

Thanks. for removing the photo from your website.
Now let's all move on.

Nicolas - in your first youtube video, what CNC machine are you using?

Hi dear Qiaozhi

Thanks for you good man

I use like this type : Building a CNC machine



look here

http://dpgeorge.net/cnc/

http://www.students.tut.fi/~kontkant/jv2.php.html

https://www.youtube.com/watch?NR=1&v=iYdO5S52nUo&feature=endscreen

About Us


Arab Kaiser devices - Kaiser reagents blurted out:


The first engineer and an expert factory Arabic submit this project for the benefit of a bro detectors metals بباطن ground


And challenges that all known odds toward the Arab industry

Greetings humble brother Abu serine and the whole work team consisting of 3 people without forgetting brother Jalal

And wait for your encouragement to us moral and material support for further progress and prosperity for the better


good wish

Nicolas

[Qiaozhi]

Hi dear Qiaozhi

Thanks for you good man

I use like this type : Building a CNC machine

look here

So this is a DIY CNC machine.
Very interesting.

[Nicolas]

So this is a DIY CNC machine.
Very interesting.

Yes my friend. You can build that


Good times
Nicolas

[Goldmaxx]

Hi dear Goldmaxx


I'm not intentionally so, but just put that because we intend to manufacture and sell it to anyone who wants it
We make customized
And it is not intended to offend you or anyone else


You are welcome

Cordially my friends
Nicolas

Hi Nicolas

It's okay, we have clarified the matter and for me it's done.

Thank you

Best Regards

[Nicolas]

Hi Nicolas

It's okay, we have clarified the matter and for me it's done.

Thank you

Best Regards

Hi dear Goldmaxx

Do not worry just a misunderstanding and I do not mean anything or offend you brother
Just put a picture of the model we are working on him and developed our own way
But Angsd so to sell your device does not imitate
But only as an idea


And thanks to all the members.You private
And again offer our apologies to everyone

ِCordially
Nicolas

[Nicolas]

So this is a DIY CNC machine.
Very interesting.

Hi dear Qiaozhi

here is new simple project for building this CNC

using Parallel Port 3 Axis CNC Driver



you can find what need in this site

http://www.instructables.com/id/Parallel-Port-3-Axis-CNC-Driver-Opto-Isolated/?ALLSTEPS

Good wishes for all

[Qiaozhi]

Hi dear Qiaozhi

here is new simple project for building this CNC

using Parallel Port 3 Axis CNC Driver

Thanks Nicolas. Looks interesting.

[zixelll]

zixelll

Now lets put this device after hey please complete circuit because I never found anything I am grateful circuit or PCB