Real clone Alonso-PD

[GOLDEN LILLY]

I made this lrl last year with the same configuration above but does not give a promising result. True, this lrl is very sensitive to the phenomenon but is not stable, it drifts from time to time. So the operator should re adjust the sensitivity oftentimes.

Regards...

[FrancoItaly]

This is the fault where we have so much amplification in DC. As with the metal detectors you need a button for retune or a motion amplifier.

Regards

[fmnotes]

This is the fault where we have so much amplification in DC. As with the metal detectors you need a button for retune or a motion amplifier.

Regards

you have an idea for improving the pd and better performance?

[FrancoItaly]

Sorry but I don't know well this lrl.
Best Regards

[fmnotes]

Sorry but I don't know well this lrl.
Best Regards

thanks Franko

[daniel]

PDK Housing

Here is my PDK housing for the Alonso Clone. I needed some good housing to do the calibration exactly. I've designed my own housing in AutoCad Light and used my DIY CNC Router to create the parts. Now I have to search for an approriate Ferriterod.

[fmnotes]

Here is my PDK housing for the Alonso Clone. I needed some good housing to do the calibration exactly. I've designed my own housing in AutoCad Light and used my DIY CNC Router to create the parts. Now I have to search for an approriate Ferriterod.

Very nice work.
You might have problems with coordination.

[daniel]

Very nice work.
You might have problems with coordination.

Thanks. What do you mean by coordination? Each coil can be moved by small increments for adjusting.

[WM6]

Here is my PDK housing for the Alonso Clone. I needed some good housing to do the calibration exactly. I've designed my own housing in AutoCad Light and used my DIY CNC Router to create the parts. Now I have to search for an approriate Ferriterod.

Very nice design, daniel. You can teach Alonso in many ways.

Probably ferrite coil should be more center pointed in regard to omega coil.

[fmnotes]

Thanks. What do you mean by coordination? Each coil can be moved by small increments for adjusting.

There is the case ferrite having to move either left or right of the center of the coil . Not sure that 's the best placement in the center .
You tried to do something that can be moved left or right to do what your settings correctly.

[paku]

is that have someone finish successfully this project

[daniel]

There is the case ferrite having to move either left or right of the center of the coil . Not sure that 's the best placement in the center .
You tried to do something that can be moved left or right to do what your settings correctly.

No, the ferrite cannot be moved left or right in this design. But if it is absolutely necessary I can modify the design of the ferrite holder and cnc new parts in a couple of minutes. I used the measurements from Andreas's post 81:

http://www.longrangelocators.com/forums/showpost.php?p=148461&postcount=81

[fmnotes]

No, the ferrite cannot be moved left or right in this design. But if it is absolutely necessary I can modify the design of the ferrite holder and cnc new parts in a couple of minutes. I used the measurements from Andreas's post 81:


http://www.longrangelocators.com/for...1&postcount=81

I've made the pd,
and therefore I tell you some things.
It will help a lot in this coordination.
And as far as possible fixed structures,
because easily detuned.
I will recommend you for the reason that you have the technology in your hands, and you can do a good job,
I will recommend to the ferrite to create a micro coordination.
so that you can restore the coordination Assists per moment where it should.

[daniel]

I've made the pd,
and therefore I tell you some things.
It will help a lot in this coordination.
And as far as possible fixed structures,
because easily detuned.
I will recommend you for the reason that you have the technology in your hands, and you can do a good job,
I will recommend to the ferrite to create a micro coordination.
so that you can restore the coordination Assists per moment where it should.

Thanks very much! I wll then implement a X/Y adjustment in the ferrite holder. But first I have to get a ferrite from old radio somewhere.

[fmnotes]

Thanks very much! I wll then implement a X/Y adjustment in the ferrite holder. But first I have to get a ferrite from old radio somewhere.

This is not difficult.
You can buy a ferrite.
There is no need to look old radios.
I hope to have good results.