Real clone Alonso-PD

[ouiarabe]

hi all
after several attempts setting my clone pd detects only the ferrite and graphite
continuous tests still

[ANDREAS]

Andreas,
I make to DD or concentric coil. How to make?.

Is your choice if use DD or concentric coils. I use omegac coil ONLY, because, i build a clone
best regards

[stergeol]

hello Antrea pls help how is the correct ??

[stergeol]

[QUOTE=stergeol;150635]here is my PD version


all pieces

[WM6]

Really nice design, stergeol. Congratulations.

[Qiaozhi]

Looks like it was cut out with a milling / engraving machine.
Nice work.

[ouiarabe]

[QUOTE=stergeol;150636]

here is my PD version


all pieces

hi
congratulations it's a beautiful work I hope it gives good results
please what is the correct position of the ferrite and coil Omega 1 or 2

[mohandes]

hi any body can put here all correct file in zip file .

[ANDREAS]

hello Antrea pls help how is the correct ??

Hi Stergie, use No2. 150 turns is front place on feritte.
regards

[stergeol]

many thanks andrea....

[ANDREAS]

Hi all
PD only for Gold it's ready. Need only final test this month, of course with videos.
I use only one stage from original PD Alonso nothing more.
Very small size and weight, full stability without humidity problems or sky-grounds effect.

Now need only fine weather and small free time.
Note: For now it remains a prototype, I have not decided yet what I'll do
best regards

[ouiarabe]

Hi all
PD only for Gold it's ready. Need only final test this month, of course with videos.
I use only one stage from original PD Alonso nothing more.
Very small size and weight, full stability without humidity problems or sky-grounds effect.

Now need only fine weather and small free time.
Note: For now it remains a prototype, I have not decided yet what I'll do
best regards

hi alonso
Congratulations
Excellent device and without complications
As for me, I still have not succeeded in the first device manufacturing, is still the problem of discrimination
He works as a pulse induction
He also works with a transmitter as in this Annex video

http://youtu.be/6r9LE4_Hmqw

[ANDREAS]

hi alonso
Congratulations
Excellent device and without complications
As for me, I still have not succeeded in the first device manufacturing, is still the problem of discrimination
He works as a pulse induction
He also works with a transmitter as in this Annex video


http://youtu.be/6r9LE4_Hmqw

Hi
I am not Alonso
I saw your video. I don't use your method
best regards
Andreas

[ouiarabe]

Please Excuse me Andreas on this unintended fault
Thank you to the spaciousness of your chest

[LRLMAN]

ALONSO PD ALL CONECTION

Hi Nicolas
Is very clean
JI (on PCB) is for connection batteries (two serial 9V=18V)
Trans (on pcb) is for connection +/-9V transmitter
Later i publish all connection with a diagram
regards

Hello Andreas do you have all conections?, when you put the interconnections of all the elements of PD to see where I'm wrong.

Already I conected all pd elements but does not work as I interconnects.


how do you see the image of the interconnections present here of the wires going to the receiving antenna seems that there are good?

what about the zero point calibration must be done first of all of the transmitting and receiving antennas if everything is connected directly and in conjunction with the ferrite? that is where I have the problem.

LRLMAN.