Real clone Alonso-PD

[abdou2014]

you did nice work . Alnso PD in hi sensitivity is unstable .

hi, i have no experience with this LRL

how you calculated or how you tested and found this frequency 186 khz ???

[Jeg]

About your advice to tune ferrite to 120 kHz and spark test, I disagree with you
I googled and found out that frequency of signal which produced by spark depends to wire and connection length of spark-making circuit. I mean antenna.
So, your 1.5-volt battery spark will produce frequency that obviously is different than others

Hi
The electrical discharge from the battery when taping its two poles with a wire, during transition times, emits a really high range of frequencies starting from low KHz up to MHz. For each of the frequencies a hell lot of harmonics also. The test by using the 1.5V battery is valid.

[humhum]

Why Spark ? Because wave light is in very high position .

[humhum]

Why Spark ? Because wave light is in very high position .

Sorry , Wave Light is very short , Freq is in very high position .

[aft_72005]

PD is made with metal detector, mixed with electromagnetic/electrostatic passive receiver,thats the circuit who play has LRL in buried objects.

Hi Morgan
Please do this test with your original Alnso PD and say what is result .
When it on without extreme sensitivity by pot . from what distance can detect cola aluminum can ?

Regards .

[aft_72005]

hi, i have no experience with this LRL

how you calculated or how you tested and found this frequency 186 khz ???

I built Alnso clone . my pd omega RF is 120 kHz . you can change TX frequency by L or C
. there are cap parallel with L . change cap .

[Farid]

Hi mr andreas
I'm making Alonso pd.
Who approves the image I am sending?
Did they open the ferrite and find out this information or is it just based on speculation?
Or was it based on a specific measurement?
I made it with the announced numbers, but it was wrong.
Is the ferrite information in this picture correct?
How is the number of wire turns counted? Was it a guess or did they open the ferrite?

[kostas87]

Hi mr andreas
I'm making Alonso pd.
Who approves the image I am sending?
Did they open the ferrite and find out this information or is it just based on speculation?
Or was it based on a specific measurement?
I made it with the announced numbers, but it was wrong.
Is the ferrite information in this picture correct?
How is the number of wire turns counted? Was it a guess or did they open the ferrite?

What is this???
who gave it to you???

[Jeg]

Hi all
Does anyone know guys where the ferrite antenna is placed at the original Alonso pd? Did he place it just in the center of his omega coils? Or far from it like we see in Andreas clone?


Are there any photos in general from the original pd?


Thank you

[daniel]

Wow after so many years this Alonso thing is still not working. LOL
I don't know either about the ferrite antenna, my Alonso replica is on the shelf for years collecting dust, was just a waste of time. I just bought a Minelab Metal Detector and have fun with it. At this time I think all this PDK stuff won't work anymore since WiFi, mobile phones, etc. are everywhere and will interfere with the PDK, PD, ...

https://www.longrangelocators.com/forums/showpost.php?p=150244&postcount=201

[Jeg]

Wow after so many years this Alonso thing is still not working. LOL
I don't know either about the ferrite antenna, my Alonso replica is on the shelf for years collecting dust, was just a waste of time. I just bought a Minelab Metal Detector and have fun with it. At this time I think all this PDK stuff won't work anymore since WiFi, mobile phones, etc. are everywhere and will interfere with the PDK, PD, ...

Thank you Daniel.

Interfierence is not a problem with a well designed antenna input though.

[Geo]

Hi all
Does anyone know guys where the ferrite antenna is placed at the original Alonso pd? Did he place it just in the center of his omega coils? Or far from it like we see in Andreas clone?


Are there any photos in general from the original pd?


Thank you

Hi Jeg.
The ferrite is aligned with the outside of the omega.
I have all infos but now i am busy. I believe at end of October to have free time.

[Jeg]

Hi Jeg.
The ferrite is aligned with the outside of the omega.
I have all infos but now i am busy. I believe at end of October to have free time.

Thanks a lot Geo, i am very glad you are fine after all this disaster in your area!!! I hope that you weren't in any kind of danger!

[Jeg]

About the device, i have some spare time and so i am thinking to experiment with that. I ll start by using only the ferrite section and a modulated transmitter. We ll see.

[Geo]

OK. Please give me your email.