Free project PDK

[Nicolas]

Hi all

If someone want to change the frequency preselected by me which is between 50 and 80 khz

you can use a variable capacitor in parallel with your coil and following your calculation of the inductance of the coil

see here

https://www.google.tn/search?q=capacitor+variable&tbm=isch&tbo=u&source=univ&sa=X&ei=rpjoUq39Acn17AaY8ICQAQ&sqi=2&ved=0CD4QsAQ&biw=1388&bih=735

use this website to calculate the values of C and L variable uH

http://www.energylabs.com.br/el/calculadora/lccalc

or this

http://chemelec.com/Calculators/Calculators.htm

FOR JUMPERs

J1-J2 = battery 9V
J4-J5 = LED1
J6-J7 = LED 2
J8-J9 = Sound
J10-J11= Coil Rx

[iron1944]

Mr. Nicolas.
Can you help me?
I amateur with your help himself to the creek behind the microampermet to attach it to the reign of the UIC to what you need?
For example.
J number?
J or B number?
Thank you.

[king40]

Mr. Nicolas.
Can you help me?
I amateur with your help himself to the creek behind the microampermet to attach it to the reign of the UIC to what you need?
For example.
J number?
J or B number?
Thank you.

j means jumper for example J8 and j9 for buzzer

[iron1944]

BUY NİCOLAS.
GREAT MASTERS.
My KOUNOOZ.CO. PDK FORUMS A13 telescopic antenna attached. Says if you takılacak.devr how the telescopic antenna circuit
Some parts of this will vary? Circuit scheme drawing on the show.
Thank you.

Or a plot of land bestowed upon us to use the telescopic antenna attendant complexity, amateur distress rigorous experimentation, there is no cost.

[Nicolas]

BUY NİCOLAS.
GREAT MASTERS.
My KOUNOOZ.CO. PDK FORUMS A13 telescopic antenna attached. Says if you takılacak.devr how the telescopic antenna circuit
Some parts of this will vary? Circuit scheme drawing on the show.
Thank you.

Or a plot of land bestowed upon us to use the telescopic antenna attendant complexity, amateur distress rigorous experimentation, there is no cost.

Hi Iron1944 I cant understand what you mean? your translate is very bad

and if you want stay in our site use only one account please. because come automatic banned.

LOOK HERE THE DETAILS AND LOOK ALSO THE SCHEME FOR UNDERSTAND

[reza vir]

Thanks nico very god project

[iron1944]

DEAR NİOCOLAS.
GREAT MASTERS
Thank you very much for your help.

[king40]

hi dear nic
if you create a loop for your free pd please take a pic of loop
thanks

[Nicolas]

hi dear nic
if you create a loop for your free pd please take a pic of loop
thanks

Hi dear not again

It's sample my friend need to calculate your frequency with the parallel capacitor

and make diameter 50 mm with core 0.35 mm

I cant told you what number of turns because that need calcul with LC

maybe L=> 820 milliHenry and 90> turns R => 6 Ohm but not sure check by your self my friend

Look comment #16

http://www.longrangelocators.com/for...6&postcount=16

[Nicolas]

Hi likng look here can Help you

http://users.telenet.be/h-consult/inductor/meerlagen_inductor.htm

For L= 830uH
Capacitor 2n2 >>>> Freq = 115 KHz
Capacitor 10n >>>> Freq = 55 KHZ

You can use Capactor variable 10nF

for frequency between 55 to 155 KHz

and make your calcul and your test

[king40]

thanks dear nic
for frequency between 55 to 155 KHz
you think this frequency range is good?

[Nicolas]

thanks dear nic
for frequency between 55 to 155 KHz
you think this frequency range is good?

55 to 115 khz is the Good for me
Because I experiment that

For other I don't know

[king40]

hi dear nic


what is the 3 pin?
if i use variable cap i must remove cx??
thanks

[Nicolas]

hi dear nic


what is the 3 pin?
if i use variable cap i must remove cx??
thanks

Is for charger connector

Cx = 470nf

[jocelito]

Hello Nicolas capacitor cx this as 470N in another scheme that appears to have 470pf which is right?

https://www.dropbox.com/s/bhdzdd9ovgzupwf/pdk.png