Free project PDK

[GOLDEN LILLY]

Yes nicolas, i will make a video for the spark test soon. The pdk does not respond to fresh gold or silver only long time buried metals, but maybe with some modification detection for fresh metal is possible. Btw, thanks for the frequency and capacitance information.

Errel

[Nicolas]

Yes nicolas, i will make a video for the spark test soon. The pdk does not respond to fresh gold or silver only long time buried metals, but maybe with some modification detection for fresh metal is possible. Btw, thanks for the frequency and capacitance information.

Errel

Thanks

and Sorry for this error

and with 4nf+1n in serial = 5n7 >>>> Frequency is near 74Khz

It's in parallel because in serial the value isn't 5n7

I m so sorry for this wrong






------------Wrong -----------------------Correct

[nelson]

Are you running this with just one 9 volt battery or it runs with two 9 volts battery?

What schematic did you use?

[Nicolas]

Are you running this with just one 9 volt battery or it runs with two 9 volts battery?

What schematic did you use?

Hi Nelson How are you and your Health?

You can run it with One battery or Two battery or Three battery 9V because the voltage for Transistor is over 40V

But be attention for The IC 555NE (read datasheet for her Voltage max)

For the schema I don't know what our friend Use but he said is the part of Alonso

Hello forum members, I built a pdk based on Alonso circuit. It is now operational but I think need some fine tuning because it detects long time buried metals including rusted iron, until now Im not sure how to narrow the detection for gold. 1.5 battery spark is at 1 meter.

Regards...

[nelson]

I m fine my friend and thanks for answering my message.
Yes Aulook said that and for me is important to know about his detection of iron, because if he got that signal, means that pdk is working and just need to get on the correct frequency to detect gold or silver.
I whrote Aulook an email, but no answer jet.
I will try to contact you by skype
Best regards
Nelson

Hi Nelson How are you and your Health?

You can run it with One battery or Two battery or Three battery 9V because the voltage for Transistor is over 40V

But be attention for The IC 555NE (read datasheet for her Voltage max)

For the schema I don't know what our friend Use but he said is the part of Alonso

[Nicolas]

Ultimate add and Update for KING LRL A41

Add option to not buried metal
And discrimination like Pinpoint after excavate to find coins or objects in the earth in the hollow of a hole

The KING LRL A41 is a multifunctional detector

http://www.youtube.com/watch?v=Hloiu7HFsCM

[nelson]

Hi Aulook, yesterday i send you an email

Yes nicolas, i will make a video for the spark test soon. The pdk does not respond to fresh gold or silver only long time buried metals, but maybe with some modification detection for fresh metal is possible. Btw, thanks for the frequency and capacitance information.

Errel

[Nicolas]

Advice and tips Of detection

Hi my friends

I bring you good news here on my long experience of research for the detection of metal

For interested manufacturing PD's or the PDK's or the LRL's

Frequencies research for metals in air is between 7 kHz and 12 kHz
Frequencies research for buried metals is between 48kHz and 115 kHz

Other advice and tip. Use normal coils or spiral without core or ferrite, because with ferrite; the magnetic fields are not wide so no good result with the distance of detection and sensitivity.

[nelson]

Dear Nicolas
How did you got that information my friend?

Hi my friends

I bring you good news here on my long experience of research for the detection of metal

For interested manufacturing PD's or the PDK's or the LRL's

Frequencies research for metals in air is between 7 kHz and 12 kHz
Frequencies research for buried metals is between 48kHz and 115 kHz

Other advice and tip. Use normal coils or spiral without core or ferrite, because with ferrite; the magnetic fields are not wide so no good result with the distance of detection and sensitivity.

[Nicolas]

Dear Nicolas
How did you got that information my friend?

Hi Nelson my Friend I have Told you that

Originally Posted by Nicolas
Hi my friends

I bring you good news here on my long experience of research for the detection of metal

And you can test it ...You find that is Right and correct my dear

It simple change your frequency and see what given you

[nelson]

Hi Nicolas

Well this is one of the points i working on. For me pdk frequency is not around 62 Khz, is lower than that.
I have a friend from Brazil who build PDk and he made a coil of 4 mH not uH. So this means that this coil is working much low in frequency than 62 Khz. The point is that this friend detected a target with moneoro fg 90 and pdk at same distance. I saw the video and also i can said that this guy is not a member of this forum.

Regards
Nelson

Hi Nelson my Friend I have Told you that

Originally Posted by Nicolas
Hi my friends

And you can test it ...You find that is Right and correct my dear

It simple change your frequency and see what given you

[jocelito]

I pdk, use ferrite coil l 402 horizontal gradient circuit TV in 2922 is 1.6 millihenries with 3,860 nanofarads.
'm from Brazil Rio Grande do Sul.
frequency 64.0422 ,I had no results yet

[Nicolas]

I pdk, use ferrite coil l 402 horizontal gradient circuit TV in 2922 is 1.6 millihenries with 3,860 nanofarads.
'm from Brazil Rio Grande do Sul.
frequency 64.0422 ,I had no results yet

I cant understand what you means my dear. Bad translation

[king40]

hi dear nic
i want to build your PD
which frequency good for build
Thanks

[reza vir]

Soil treasure every country has different frequency