Free project PDK

[roccocoin]

part list

here nicolas sheet part list,see part list on the sheet, not shown alongside the component values where and marked on the PCB.

[roccocoin]

hello nicola

here nicolas sheet part list,see part list on the sheet, not shown alongside the component values where and marked on the PCB.

p.s......HELLO NICOLA, LC 6N8 WHERE IS INSTALLED?
CX 470PF?
BUT ON LIST CX COMPONENTS AND MARKED 6N8?

[Nicolas]

p.s......HELLO NICOLA, LC 6N8 WHERE IS INSTALLED?
CX 470PF?
BUT ON LIST CX COMPONENTS AND MARKED 6N8?

Hi rocco read all comments qnd the update you find that please i don't like repeat and i m so busy sorry

lc mean parallel to coil to do your frequency
Cx is 470 pf

http://im83.gulfup.com/AWqNPW.png

[roccocoin]

My great friend

Hi rocco read all comments qnd the update you find that please i don't like repeat and i m so busy sorry

lc mean parallel to coil to do your frequency
Cx is 470 pf

http://im83.gulfup.com/AWqNPW.png

nicolas sorry you're really kind, I'll try not to bother you more, but if I have need of you still bother you. you really are a kind person and helpful, a big hug and a big thank you

[roccocoin]

hi nicolas

nicola hello, I just wanted to ask you one more thing and then not bother you more:
I wanted to ask the upper slopes of the board must be connected with those of the underlying base? only this I wanted chiederti.tanks nicola

[Nicolas]

nicola hello, I just wanted to ask you one more thing and then not bother you more:
I wanted to ask the upper slopes of the board must be connected with those of the underlying base? only this I wanted chiederti.tanks nicola

Hi Rocco not understand me bad never i said someone bother me but i have only big work and creation 2015 for my devices then i need so much concentration.

Really i cant understand what mean exactly because i find bad translation into Italic and English.
you can contact me at my email i can send you details and sheme

[roccocoin]

hello nicolas

I contacted in email nicolas best regards

[mahinda]

please help me ...what is the resonant frequency in sri lanka
i am Mahinda

[mahinda]

please give me circuit diagram . I like to make this circuit

thank you

[Nicolas]

please give me circuit diagram . I like to make this circuit

thank you

Hi , mahinda look this link

http://www.longrangelocators.com/forums/showpost.php?p=148317&postcount=4

[LRLMAN]

FREQUENCY

Find fix your reception frequency between 24.75KHz and 44.03 KHz and try it in your country
and give me your comments and test

you can use this to know your value for coil and capacitor

http://www.energylabs.com.br/el/calculadora/lccalc

Hello Nicolas can you calculate the frequency for my area? my contry is Mexico in pacific coast Lazaro Cardenas, Michoacan the coordinates are as follows: 18°01'13.66" N and 102°12'50.40" O

Greetings.

LRLMAN.

[Nicolas]

Hello Nicolas can you calculate the frequency for my area? my contry is Mexico in pacific coast Lazaro Cardenas, Michoacan the coordinates are as follows: 18°01'13.66" N and 102°12'50.40" O

Greetings.

LRLMAN.

Welcome try between 19.52 khz and 29.56 Khz

[LRLMAN]

Welcome try between 19.52 khz and 29.56 Khz

Hello Nicolas,

how did you determine these values????

Because I think they are wrong and do not correspond in value of the transmitting loran nearest to this place.

LRLMAN.

[taxma1981]

the values of resistors in front of the sum is 555; it is necessary to put; (680 k and 100nf )????filter rc

[LRLMAN]

Hello Nicolas,

how did you determine these values????

Because I think they are wrong and do not correspond in value of the transmitting loran nearest to this place.

LRLMAN.