Free project PDK

[المهندس]

Hello, I made this device and received iron with it. What do I do to get the precious metals?

https://g.top4top.io/p_1679dvmk91.jpg

[humhum]

Hello, I made this device and received iron with it. What do I do to get the precious metals?

https://g.top4top.io/p_1679dvmk91.jpg

Not open this link .

[WM6]

Not open this link .

Maybe this was temporary.
For me normally open now.
Some rusty iron parts on photo.

[shahrayar]

Hello, I made this device and received iron with it. What do I do to get the precious metals?

https://g.top4top.io/p_1679dvmk91.jpg

Put a piece of gold inside the coil

[المهندس]

Put a piece of gold inside the coil

Thank you, but how do you please clarify

[Sreekumar]

Dear nicolas please tell me my coil details,my country is india,please regards brothers?

[Sreekumar]

Help me

Dear nicolas,
My frequency is 16.3khz and capacitor is 100nf and inductance is 953uh,right?

[abdou2014]

Indian Navy VTX1 16.3 kHz VLF signal

PDK is not VLF receiver , gold gun is

[Sreekumar]

I do not know ,my indian frequency is?

[kaligula]

https://youtu.be/xdPC8gs78OE

Can anybody tell me how i can find buried targets with this my pdk. Here's catching signal from fisher, but i dont know how i can use it. Please help, i had made it 5 years ago and i dont know what to do with it

[kostas87]

Hello, I made this device and received iron with it. What do I do to get the precious metals?

https://g.top4top.io/p_1679dvmk91.jpg

put a variable capacitor in the first filter where the first stage is in the coil with the 1M resistor and the 500pf capacitor and play with it until the gold or silver signals appear. replace the capacitor with the best results. few people manage to find even an iron, send me a message ..

[kaligula]

put a variable capacitor in the first filter where the first stage is in the coil with the 1M resistor and the 500pf capacitor and play with it until the gold or silver signals appear. replace the capacitor with the best results. few people manage to find even an iron, send me a message ..

Thanks, ill try and tell you. Can you write schematic where to put capacitor and resistor?

[ERDOGAN37]

help me

Hello, I'm working on the project. I want to connect a frequency meter to the project. I don't know where to connect it on the project. Please can you help me?

[shahrayar]

I made this scrap and all frequencies work from 60 to 800 kHz good at detecting treasures and the frequency is unimportant
The problem is how do we determine where the gold is buried?
Please Nikola Tesla I want a solution

[Jeg]

Hi Nicolas
I would like to ask you, how do you deal with the compass effect and when the device is close to power lines or other cables like telecomunication ones. I ask that because your input is not differential and normally the input signal levels are changing with the angle of detection.



Thanks