metal frequency (my test)

[iam_7up_gamer]

We understand from this that the frequency of fresh gold is 59khz or is 59.5khz or be 130 khz

This ia resonant story , fresh gold detect with 5khz , 59 khz , 59.5 khz , 62 khz , 133 khz , 258 khz , 1.3 mhz , 13 mhz ,17 mhz, and giga rang

[Nicolas]

this is my first test for gold since 2010
the frequency for Gold is 59.000 to 59.889 HZ
you can look it here good mode slowly

https://www.youtube.com/watch?v=X7WN3NJFFdY

the frequency 62khz i think is not stable. but 59.000 and 60.000 Hw yes and so better

[Nicolas]

Hi,
this frequency table is for use on pure electronic locators , or is intended for L- rods type?

This is tested by me at my lRl's dear friend

I have 6 frequency selectetd by a selector.

Bronze for me is not 62.000 but 56.300
look at my viedo you can understand good

[iam_7up_gamer]

yes bronze not detect with 62 khz . in my lrl 55 khz is so good . with 55 khz detect from 20 meter and with 595 khz detect from 150 meter

[goldfinder]

Frequencies are in the eye of the opinion holder

[QUOTE=iam_7up_gamer;151446]Hello to all lrl loves,

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)


I have studied this frequency thing of metals for some time. These frequencies fit with
theory and are harmonics or close to yours.
Here are other frequencies, plus or minus some variable factor, that come out of my research. You will note for example that your silver frequency is a subharmonic of mine.
Gold 50 khz
Silver 85 khz
Lead 4.25 khz

Many dowsers use numbers that are like those of mine above. When they do this it is pure mental dowsing. For example they come up with 5 KHZ. If there was a frequency like crap for gold, put crap in the machine and the dowser would find it.

Many of frequencies come from poorly tuned machines that the frequencies are way off because their measurement machines and signal generators are lousy.
GF