Announcement

Collapse
No announcement yet.

A REAL AND TRUE LONG RANGE LOCATOR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    hi man

    Originally posted by FrancoItaly View Post
    I think that the principle of operation of all lrls start from the first (Alonzo PD) that was a metal detector (an induction balance) modified with the addition of a ferrite and an amplifier stage. My first lrl was a PI in which the signal from an antenna was mixed with the signal of the PI oscillator. My last LRL in practice follows the same principle, except that the internal oscillator does'n drive a coil and serves only to provide a signal to the mixer. So I think it is a useless job to build an MD and then modify it to use it as an lrl.
    Esteban said that even an FM receiver (not tuned to any station) could work as lrl and therefore no MD is needed, All you need is an oscillator that is mixed with the signal from the FM receiver. I am convinced that almost all lrls are passive receivers and therefore there is no reason to construct transmitting coils and moreover there is not a particular frequency that for example allows to reveal only gold. Obviously you are free to experiment, in this field you need a lot of practice since the theory is very little.

    you are right

    But sometimes some of us have all the equipment needed to test the circuits and examine them by exploring their secrets


    One thing is missing the "idea"


    If you have an idea about what to do, it is easy to accomplish the goal


    regads

    Comment


    • #17
      hi

      Originally posted by FrancoItaly View Post
      The main advantage of an lrl is that it is insensitive to iron and has a range of several meters. I do not think it's a big inconvenience if it also reveals silver and copper.


      by the way

      Your device needs just hair to success



      MAN you are almost done to have a very real lrl

      Comment

      Working...
      X