ALONSO PD MISSION ACCOMPLISHED V1,V2

[Geo]

If you have very good null at ferrite then 40...60 cm.

[abdou2014]

for a low frequency transmission by the transmitter of the alonzo clone, it is best to add the number of turns or keep the original configuration and increase the parallel C ???

[humhum]

my receiver catches the 1.5 V battery spark with 30 cm cable, at a distance of 3.80 meters.
Does this mean anything on the field?
Nothing at all.

Catches of spark wiev sensitivity of Your circuit , but this method not wiev that works in real
field .
For example :
Circuit with high sentivity can receive spark from 20m or 50m , but in real field can't
catch from phenomenon energy , because here need real calibration for receive real
wavelenght of phenmenon .
When calibration of circuit is Real , so You can find Big buried object upto ... more meters or
distance with clone Alonso PD , but about Spark only in cm or few meter .

[kostas87]

if it detects a spark at 2 meters it says nothing about the phenomenon of buried metal, at least for my area. with many hours out and many tests I ended up with a 100nf capacitor in the receiver, and with an RF signal at 2.8khz and 3.3khz to detects huge objects from a distance of a few meters..the spark detection dropped to 60 cm..I think the RF signal is important to increase the distance x 3 times, but if the Receiver does not respond to the phenomenon very close to your area which is the most importantly you will not catch anything with the RF that just increases the distance ..

[kostas87]

I do not have access to the secret forum that has a lot of information from esteban etc, but with the tests and some personal expenses I came to the conclusion that it does not take much to detect the phenomenon of the noble metal from a few meters away ... I think you need a sensitive receiver in combination with the sound generator, a BFO absorption system, and a beacon RF circuit and with the right combination can detect the phenomenon ..

[kaveh]

Hello to all good friends and Mr. Alenso
Mr. Allenso, I want to use the mpsa18 transistor in this circuit. Is there no problem? Thank you

[Geo]

Mr Alonso is not member of this forum.
Mpsa18 has lower Bandwidth and highter β.
I don't know if it's a good choise to replace BC.... with it.

[Geo]

I do not have access to the secret forum that has a lot of information from esteban etc, but with the tests and some personal expenses I came to the conclusion that it does not take much to detect the phenomenon of the noble metal from a few meters away ... I think you need a sensitive receiver in combination with the sound generator, a BFO absorption system, and a beacon RF circuit and with the right combination can detect the phenomenon ..

The secret is a good design, a carefully construction, a fine tunning and of course a strong phenomenon. Without phenomenon it is difficult to do a lrl to work!!!

[Geo]

for a low frequency transmission by the transmitter of the alonzo clone, it is best to add the number of turns or keep the original configuration and increase the parallel C ???

Why to change the frequency???
All the story is to make the passive receiver to work out of saturation

[abdou2014]

thanks Geo for the idea

[Pahom]

thanks Geo for the idea

This is not an idea, this is a radio theme !!!

[abdou2014]

radio theme ???????? explain my friend ???

[kostas87]

The secret is a good design, a carefully construction, a fine tunning and of course a strong phenomenon. Without phenomenon it is difficult to do a lrl to work!!!

https://youtu.be/hU4QKDA6HuU

[kostas87]

https://youtu.be/hU4QKDA6HuU

it is everywhere, we are not (weaker.).I think it plays in another setting inside, depending on which device you are looking for, not everything works here in our country ... as in Brazil not everything works there .... I saw a video, which with a vc86 that worked much better than anything ,,, and another dch 85 in the same area and never got a signal ...

[Pahom]

https://youtu.be/hU4QKDA6HuU

https://www.youtube.com/watch?v=taxH9LYe1iI