ALONSO PD MISSION ACCOMPLISHED V1,V2

[Geo]

Αlthough i don't remember exactly the turns, they depends from pot core's Al.

[abdou2014]

Thank you .

[abdou2014]

I have another question if you allow, in my region the transmitter is located in the north, in which direction I should search with my LRL?

[aft_72005]

the price for this PD is high,its not possible to make it 100% stable,it drift,this is big price for that kind of locator,the original cost 2.000 dollars the clone 20.000 dollars.
yes it work as a treasure locator but at short distances of only a few meters as Geo confirm this behavior when play with the PD here in my field test,there are videos showing that.

I built the PD Alonso in 2010 and it worked. But the problem was instability. at that time, I believed that the original PD you have also has drift and is unstable.
Whenever I have the time, I will work to fix its instability problem.

[abdou2014]

What is the so exotic and you hidd it ??

ITS EXOTIC SECRET
NOW I WORK WITH NEW TECH LRLs CREATED BY ME

[Geo]

ITS EXOTIC SECRET
NOW I WORK WITH NEW TECH LRLs CREATED BY ME

Congratulation.....

[Geo]

I built the PD Alonso in 2010 and it worked. But the problem was instability. at that time, I believed that the original PD you have also has drift and is unstable.
Whenever I have the time, I will work to fix its instability problem.

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

[abdou2014]

Congratulation.....

Thank you dear friend , It's true that it took me a while to understand, but now everything is clear

[aft_72005]

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

Did your PD Alonso also have instability?
In my opinion, the original PD Alonso must also be unstable. In the films that you and Morgan recorded in Portugal.. all the films are only a few seconds and at most a minute... the PD is being processed and explored... there is no film that is being processed and explored for 10 minutes.
Yes, I have very precise measuring equipment.
The use of high-beta transistors in the form of Darlingtons is one of the reasons for the PD's instability.

[aft_72005]

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

Next item. Morgan reads the messages here but doesn't respond.
Morgan said that the PD can detect a coin from 30 cm. For an Omega coil with a diameter of 10 cm, this is an unusual detection distance!!! Did you test in Portugal to see from what distance it could detect a coin?

[Geo]

Did your PD Alonso also have instability?
In my opinion, the original PD Alonso must also be unstable. In the films that you and Morgan recorded in Portugal.. all the films are only a few seconds and at most a minute... the PD is being processed and explored... there is no film that is being processed and explored for 10 minutes.
Yes, I have very precise measuring equipment.
The use of high-beta transistors in the form of Darlingtons is one of the reasons for the PD's instability.

My PD is very stable. I must turn it on and wait for 1 minute, after it i can adjust it and go.
At Portugal our purpose was to show that PD works and can catch the phenomeno. Our interest was not to show how much good was the PD.
The main problem was that it needed very critical adjustment.

[Geo]

Next item. Morgan reads the messages here but doesn't respond.
Morgan said that the PD can detect a coin from 30 cm. For an Omega coil with a diameter of 10 cm, this is an unusual detection distance!!! Did you test in Portugal to see from what distance it could detect a coin?

I think near to 15 cm, maybe 20 cm max. So does mine pd

[Geo]

The long range detection is a very strange thing. Although i have detect many objects with many lrl i can't say with sure "take this lrl and it will work 100%"

[aft_72005]

My PD is very stable. I must turn it on and wait for 1 minute, after it i can adjust it and go.
At Portugal our purpose was to show that PD works and can catch the phenomeno. Our interest was not to show how much good was the PD.
The main problem was that it needed very critical adjustment.

My Alonso circuit on the workbench is very stable.
The instability occurs during the search. The place where it becomes unstable is where the metal is buried.

[aft_72005]

I think near to 15 cm, maybe 20 cm max. So does mine pd

Yes.
I have fine-tuned the Omega and it detects coins at best from 20 cm. No more.