Hi, Okantex. Hung said "the same principles" regarding ionization. I use terminology RF because inside there are a PCB with RF section wich detect the difference in RF pattern. Also RF detects the ionization of buried good conductive metals.
You can measure the depth with arithmetic formula. I'll post the drawings of it.
I wanted to mean that can zahori measure dept with this (mineoro) method.
ANd I have an offer for you.
we do this with rods.
when you center target .nail a copper pin (8 mm -12mm diameter. 30cm lenght.copper pipe) 10-20cm nailing to ground is enough.be sure that it must be tightly driven to ground.surface must kiss earth.
tahn wait for 10 minutes.
and move back with mineoro.
good luck.
Hi Esteban
Does using round wound anntena(like ones in pics. up and mineoro) has adventage (and disadventage) over teleskobic antennas like in zahori and FG.
Comment