Hi Max Please show me where are this pages wrote about Program of 2051 or how it works microcontroller board ? Where of this pages you saw waveforms pictures ?
Hi.
I attach here the schematic of Mineoro FG79 based on the work of AlexisMex.
I made this schematic incumbent on the work of Alexis and from everything else that i found on the internet, plus from my work of reversing the pcbs.
I have read the most prices of the parts but i will wait until to be sure about all of them and then to attach them to the schematic.
Hi Geo,
Interesting circuit, very similar function to the ferrite circuit of the PD, except for the "ion chamber" that has no function at all imo , directly connected to the low impedance base of a transistor
What is the "10hz" signals, it comes from the atmega?
Hi Geo,
Interesting circuit, very similar function to the ferrite circuit of the PD, except for the "ion chamber" that has no function at all imo , directly connected to the low impedance base of a transistor
He,he,he...no wonder you are one of geoskepthic's favorite 'engineers'...
"Should exist injustice and untruths towards working LRLs, I'll show up to debunker the big mouths"
Hi.
I attach here the schematic of Mineoro FG79 based on the work of AlexisMex.
I made this schematic incumbent on the work of Alexis and from everything else that i found on the internet, plus from my work of reversing the pcbs.
I have read the most prices of the parts but i will wait until to be sure about all of them and then to attach them to the schematic.
A present for Happy New Year
Hello Geo.
This is not the FG79 schematics.
This is the old CDM210 still with the discontinued ATMEL 2051.
Also, are you sure this schematics are correct?
I don't think so...
Regards.
"Should exist injustice and untruths towards working LRLs, I'll show up to debunker the big mouths"
Hi Geo,
Interesting circuit, very similar function to the ferrite circuit of the PD, except for the "ion chamber" that has no function at all imo , directly connected to the low impedance base of a transistor
What is the "10hz" signals, it comes from the atmega?
Hello Geo.
This is not the FG79 schematics.
This is the old CDM210 still with the discontinued ATMEL 2051.
Also, are you sure this schematics are correct?
I don't think so...
Regards.
Hi Hung.
I don't know the Mineoro models good
But if i read good at this post http://geotech1.com/forums/showthrea...hlight=Mineoro
then i see that it writes CDM210 and FG79.1 Fresh Gold.
Schematic is OK, but i must add the low battery check... the regulators... etc. I have it at 4 pages so maybe at transfer to one page to make a small mistake, but i don't think
Hi.
I attach here the schematic of Mineoro FG79 based on the work of AlexisMex.
I made this schematic incumbent on the work of Alexis and from everything else that i found on the internet, plus from my work of reversing the pcbs.
I have read the most prices of the parts but i will wait until to be sure about all of them and then to attach them to the schematic.
A present for Happy New Year
Here is the Ionic Chamber FG 79 ,with 24 K GOLD,was open by Alexis Mex...
Maibe it works the same with siver...
Comment